seeburg 100 C selection problem

Hi Guys. I have recently been restoring a Seeburg 100C. I have rebuilt
the pinbank and cleaned the keyboard switches. All my selections work
except A 1 and 2 and G 1 and 2. The coils test good. I could use some
help on this. Please drop me a line if you have a suggestion, Thanks terry
--
Terry Legere/Linda Allen

Terry's Jukeboxes
http://www3.sympatico.ca/rockola1422/juke.htm

Check that you haven't accidentally allowed the pigtail wire from the group
armature coil plate(s) for the first and fourth selection groups to get tucked
under the contact fingers of the plate (pull the top metal cover of the pin
bank to check). It happens pretty easily and is some times hard to notice.

The other possibility might be a group magnet plate contact finger that is
bent out of position, but it's unusual to get just the right two bent.

Joseph "Tony" Dziedzic

In article , Terry Legere &
Linda Allen wrote:
Hi Guys. I have recently been restoring a Seeburg 100C. I have rebuilt
the pinbank and cleaned the keyboard switches. All my selections work
except A 1 and 2 and G 1 and 2. The coils test good. I could use some
help on this. Please drop me a line if you have a suggestion, Thanks terry