seeburg worm gear

Looking for a camshaft worm gear for a Seeburg LPC1, or possibly a
junk mech that I could scavenge one out of. (Mech #160ST25.) This is
the gear on the end of the camshaft that meshes with the motor drive
gear.

Thanks

Flats

This is probably too expensive for just this one part, but I have a
complete LPC-1 mechanism in my Ebay store. I'd be willing to dismantle
it to save on shipping if you can't find just the part you need.

http://cgi.ebay.com/ws/eBayISAPI.dll...m=3276903 415



(Flats) wrote in message . com...
Looking for a camshaft worm gear for a Seeburg LPC1, or possibly a
junk mech that I could scavenge one out of. (Mech #160ST25.) This is
the gear on the end of the camshaft that meshes with the motor drive
gear.

Thanks

Flats

Be sure to get the exact part for that machine . I cant remember the
details anymore but i went through this and the LPC would not play side
2`s with the wrong gear .

The LPC has a special clutch.. if you don't intend to play the 7" 33s in the
future.. you can swap in a set of native 45 rpm gears and forget it.

Don

"Ken G." wrote in message
...
Be sure to get the exact part for that machine . I cant remember the
details anymore but i went through this and the LPC would not play side
2`s with the wrong gear .



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.602 / Virus Database: 383 - Release Date: 3/1/04

This is a customer's unit, so I would like to find the right gear or
camshaft assy to repair it properly.

Flats