If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Seeburg R Continously Scans
I moved the juke to my daughter and now it scans continuously. When I disconnect the single connector it stops. When I unplug all plugs except for the service switch, it scans. I have replaced the switch and unsoldered wires out of the service switch plug socket . When pin bank jones plug removed, still scanned. Removed pin bank and checked connections to contact block.
Reset all contacts on mech and verified reset switch working. Play solenoid always energized and ground persists from service switch plug socket. JUKE selects plays and rejects as it should. Feels like there is an unwanted ground somewhere? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
seeburg q160 scans twice | garyh1 | Juke Boxes | 4 | January 8th 13 06:57 AM |
Seeburg 161 Scans twice does NOT select record.... ONLY sometimes | [email protected] | Juke Boxes | 5 | September 8th 12 03:12 PM |
Seeburg 222 scans but wont grab a record. | Dave27 | Juke Boxes | 2 | October 13th 10 01:48 AM |
Seeburg STD3 "Scans Twice" Problem | Tony[_5_] | Juke Boxes | 2 | October 10th 09 04:03 AM |
Tech: Seeburg 201 continuously scans for record | [email protected] | Juke Boxes | 2 | June 25th 05 04:50 AM |