If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
wurlitzer 1400.
i started working on a wurlitzer 1400 jukebox. know nothing about
them. do have a manual. when i turn it on it selects the bottom record and plays it. when i hit the cancel button it rejects but plays the same record. i have checked all tabs and they are all reset so i cant find out why it keeps cyling back and forth as the selector doesnt hit anything when it turns. give me your ideas please. thanks for the help on the ami-g-200. have it mostly working all the way. really has a gret sound. thanks to you all. norm |
Ads |
#2
|
|||
|
|||
wurlitzer 1400.
In article
, em pinball wrote: i started working on a wurlitzer 1400 jukebox. know nothing about them. do have a manual. when i turn it on it selects the bottom record and plays it. when i hit the cancel button it rejects but plays the same record. i have checked all tabs and they are all reset so i cant find out why it keeps cyling back and forth as the selector doesnt hit anything when it turns. give me your ideas please. thanks for the help on the ami-g-200. have it mostly working all the way. really has a gret sound. thanks to you all. norm Wobble plate and or switch to it is stuck. |
#3
|
|||
|
|||
wurlitzer 1400.
On Dec 18, 11:19*pm, Philip Nasadowski wrote:
In article , *em pinball wrote: i started working on a wurlitzer 1400 jukebox. know nothing about them. do have a manual. when i turn it on it selects the bottom record and plays it. when i hit the cancel button it rejects but plays the same record. i have checked all tabs and they are all reset so i cant find out why it keeps cyling back and forth as the selector doesnt hit anything when it turns. give me your ideas please. thanks for the help on the ami-g-200. have it mostly working all the way. really has a gret sound. thanks to you all. norm Wobble plate and or switch to it is stuck. No, that's not wobble switch, it would keep scanning but not repeat. If you are -sure- that the pin for that record has been put down, and the arm point that touches it is not touching the pin, push that arm back and forth slightly to see if it has become sluggish due to dirt- old oil-etc. It is also possible that the micro switch that the arm actuates in the center of that assembly has gotten stuck, but most likely it is the linkage or oil that has become gummy. I had this problem on a 2300S and it was a PIA to effect a permanent fix. Rob |
#4
|
|||
|
|||
wurlitzer 1400.
On Dec 19, 3:54*am, Rob in NYC wrote:
On Dec 18, 11:19*pm, Philip Nasadowski wrote: In article , *em pinball wrote: i started working on a wurlitzer 1400 jukebox. know nothing about them. do have a manual. when i turn it on it selects the bottom record and plays it. when i hit the cancel button it rejects but plays the same record. i have checked all tabs and they are all reset so i cant find out why it keeps cyling back and forth as the selector doesnt hit anything when it turns. give me your ideas please. thanks for the help on the ami-g-200. have it mostly working all the way. really has a gret sound. thanks to you all. norm Wobble plate and or switch to it is stuck. No, that's not wobble switch, it would keep scanning but not repeat. If you are -sure- that the pin for that record has been put down, and the arm point that touches it is not touching the pin, push that arm back and forth slightly to see if it has become sluggish due to dirt- old oil-etc. It is also possible that the micro switch that the arm actuates in the center of that assembly has gotten stuck, but most likely it is the linkage or oil that has become gummy. I had this problem on a 2300S and it was a PIA to effect a permanent fix. Rob Sorry, I should have read more carefully, Phil is right about that mech, the wobble plate is the likely cause on there. Rob |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wurlitzer 1400-1450 | em pinball | Juke Boxes | 1 | November 5th 10 09:01 PM |
wurlitzer 1400 help | em pinball | Juke Boxes | 2 | September 11th 10 03:21 AM |
wurlitzer 1400 | [email protected] | Juke Boxes | 2 | May 3rd 07 02:41 AM |
Wurlitzer 1400 approximate value | Mark Scohy | Juke Boxes | 0 | December 1st 03 12:07 AM |
Question Wurlitzer 1400 | Bill Wheeler | Juke Boxes | 0 | July 30th 03 04:41 AM |