If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wurlitzer 1400 selector problem
Most of the time selector numbers 1-9 work. Sometimes more selector work. Then all selectors work. I have cleaned all contacts. I have a manual but cannot find the issue. Thanks for any help. Larry
|
Ads |
#2
|
|||
|
|||
Wurlitzer 1400 selector problem
There is a black wire on the top terminal of a switch beside coin mech that breaks off commonly, resolder it and try again.
|
#3
|
|||
|
|||
Wurlitzer 1400 selector problem
On Friday, January 12, 2018 at 8:56:07 PM UTC-5, wrote:
There is a black wire on the top terminal of a switch beside coin mech that breaks off commonly, resolder it and try again. Thanks for your response. The problem was the spring tension on the contact on front top left of coin mech. Thanks Larry |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wurlitzer 1400 | JJohn | Juke Boxes | 0 | February 22nd 12 03:50 AM |
problem with 1400 wurlitzer | em pinball | Juke Boxes | 0 | December 20th 10 06:26 PM |
AMI I 200 Selector Problem | wendlandt | Juke Boxes | 2 | November 19th 10 03:39 PM |
wurlitzer 1400 help | em pinball | Juke Boxes | 2 | September 11th 10 03:21 AM |
Seeburg 100B selector problem | Terry Legere & Linda Allen | Juke Boxes | 3 | April 1st 04 01:36 AM |