If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Seeburg LS1 Scan Issues
I have a Seeburg LS1 that will not scan. If you make a
selection the number/letter seem to latch and then release fine but the carriage will not scan in play mode. At this time, if you put the machine into manual scan and then back to play mode, than sometimes it will pick up the record and play fine.If you get the first record to select and play and you have multiple selections than it will play them all ok. I have setup the contacts for the S1100 Cam switches and also verifed the reversing switch bank with a multimeter. The problem is getting it to take the first selection and start scanning?Not sure if I am on the right path or way out in left field. Hoping someone can help. P.S Remove the 123 from the email address to reply directly Tony Logan |
Ads |
#2
|
|||
|
|||
The first question is: Do you have a manual? JimJukebox
"Anthony Logan" wrote in message ... I have a Seeburg LS1 that will not scan. If you make a selection the number/letter seem to latch and then release fine but the carriage will not scan in play mode. At this time, if you put the machine into manual scan and then back to play mode, than sometimes it will pick up the record and play fine.If you get the first record to select and play and you have multiple selections than it will play them all ok. I have setup the contacts for the S1100 Cam switches and also verifed the reversing switch bank with a multimeter. The problem is getting it to take the first selection and start scanning?Not sure if I am on the right path or way out in left field. Hoping someone can help. P.S Remove the 123 from the email address to reply directly Tony Logan |
#3
|
|||
|
|||
Yes I do have a manual for this box and after looking at the schematic
for sometime I think I will start looking at the add solenoid because this seems to be what closes the scan contacts 2E1. I will post after I try this next step. Jim Murphy wrote: The first question is: Do you have a manual? JimJukebox "Anthony Logan" wrote in message m... I have a Seeburg LS1 that will not scan. If you make a selection the number/letter seem to latch and then release fine but the carriage will not scan in play mode. At this time, if you put the machine into manual scan and then back to play mode, than sometimes it will pick up the record and play fine.If you get the first record to select and play and you have multiple selections than it will play them all ok. I have setup the contacts for the S1100 Cam switches and also verifed the reversing switch bank with a multimeter. The problem is getting it to take the first selection and start scanning?Not sure if I am on the right path or way out in left field. Hoping someone can help. P.S Remove the 123 from the email address to reply directly Tony Logan |
#4
|
|||
|
|||
Anthony, Do the selection buttons hold in properly until a selection is made and then release?
"Anthony Logan" wrote in message ... Yes I do have a manual for this box and after looking at the schematic for sometime I think I will start looking at the add solenoid because this seems to be what closes the scan contacts 2E1. I will post after I try this next step. Jim Murphy wrote: The first question is: Do you have a manual? JimJukebox "Anthony Logan" wrote in message ... I have a Seeburg LS1 that will not scan. If you make a selection the number/letter seem to latch and then release fine but the carriage will not scan in play mode. At this time, if you put the machine into manual scan and then back to play mode, than sometimes it will pick up the record and play fine.If you get the first record to select and play and you have multiple selections than it will play them all ok. I have setup the contacts for the S1100 Cam switches and also verifed the reversing switch bank with a multimeter. The problem is getting it to take the first selection and start scanning?Not sure if I am on the right path or way out in left field. Hoping someone can help. P.S Remove the 123 from the email address to reply directly Tony Logan |
#5
|
|||
|
|||
The selection buttons hold in until both the letter and number are
pressed and then both release but the unit never starts to scan.If I manually put the mechanism into scan that seems to work fine and sometimes you can get it to select the record this way. This juke I am looking at is for a friend so I will not be there until Wednesday to troubleshoot. I certainly think that maybe the add coil is not picking up but I will not be sure until I start going through the circuit at that time. I will post as I start to gather more details. Jim Murphy (Murf) wrote: Anthony, Do the selection buttons hold in properly until a selection is made and then release? "Anthony Logan" wrote in message ... Yes I do have a manual for this box and after looking at the schematic for sometime I think I will start looking at the add solenoid because this seems to be what closes the scan contacts 2E1. I will post after I try this next step. Jim Murphy wrote: The first question is: Do you have a manual? JimJukebox "Anthony Logan" wrote in message ... I have a Seeburg LS1 that will not scan. If you make a selection the number/letter seem to latch and then release fine but the carriage will not scan in play mode. At this time, if you put the machine into manual scan and then back to play mode, than sometimes it will pick up the record and play fine.If you get the first record to select and play and you have multiple selections than it will play them all ok. I have setup the contacts for the S1100 Cam switches and also verifed the reversing switch bank with a multimeter. The problem is getting it to take the first selection and start scanning?Not sure if I am on the right path or way out in left field. Hoping someone can help. P.S Remove the 123 from the email address to reply directly Tony Logan |
#6
|
|||
|
|||
Seeburg LS1 Scan Issues
Jim my Lsi won't scan won't scan either...I cleaned and oiled the clutch The turntable continuously moved but won't scan and jest a 7 is lighted on the selection display... Also it's been sitting for about 40yrs my dad bought it new in 1968. I don't know where the manual scan switch is located. John in Orlando.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: AMI Continental 2, Seeburg C, Seeburg J, 1650 Wurlitzer | Lloyd Thoburn | Juke Boxes | 0 | March 18th 04 11:47 PM |
Seeburg >Technical Help Needed< - Please- | McDuseldick | Juke Boxes | 1 | January 3rd 04 05:15 PM |
Operation of AMI Scan Control | Paul West | Juke Boxes | 4 | October 14th 03 12:53 AM |
Wurlitzer and Seeburg domain take over | stuorto | Juke Boxes | 1 | September 13th 03 06:57 PM |
Record Handling; Seeburg vs. Rockola, how about AMI or Wurlitzers? | KLR | Juke Boxes | 5 | July 1st 03 04:19 PM |