If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
"Nature of Amarica" sheets on cover - how?
I would like to create a cover using the upcoming US "Northeast
Deciduous Forest" sheet, P/O the "Nature of Amarica" series. This will have a single design over the entire sheet, with 10 individual die-cut stamps scattered over it. All self-adhesive. Can people tell me what methods they have used to attach an entire sheet like this to a cover? I can see a few possiblities: 1) Carefully peeling off the entire backing paper w/o separating any stamps and applying the (hopefully) fully intact front to the cover using the self-stick glue. 2) Using glue to attach the whole sheet, including the backing paper, to the cover Does anyone have any better ideas? -- = Eric Bustad, Norwegian bachelor programmer |
Ads |
#2
|
|||
|
|||
I have NOT tried this myself, but I have been told that if one puts multiple
strips of peelable tape across the stamps on such a sheet (on the front), temporarily holding them in place with respect to the surrounding paper, that it becomes much easier to peel the backing away without dislodging the stamps from their position on the sheetlet. As soon as the intact sheetlet is attached to a cover, remove the peelable tape so it doesn't stick itself down more firmly. As I said, I haven't tried it, but it seems worth considering. Ada "Eric Kenneth Bustad" wrote in message ... I would like to create a cover using the upcoming US "Northeast Deciduous Forest" sheet, P/O the "Nature of Amarica" series. This will have a single design over the entire sheet, with 10 individual die-cut stamps scattered over it. All self-adhesive. Can people tell me what methods they have used to attach an entire sheet like this to a cover? I can see a few possiblities: 1) Carefully peeling off the entire backing paper w/o separating any stamps and applying the (hopefully) fully intact front to the cover using the self-stick glue. 2) Using glue to attach the whole sheet, including the backing paper, to the cover Does anyone have any better ideas? -- = Eric Bustad, Norwegian bachelor programmer |
#3
|
|||
|
|||
I would be inclined to remove the backing along the top inch or so and
attach the SA portion of the sheet to the HUGE cover, then work my way down slowly peeling the backing from under the entire sheet and away from the top and pressing the SA part down as I go. I would think that if you go slowly the stamps alignment with their surrounding selvege (or whatever you call it) would remain intact and it should transfer nicely. A peel and press method, until you've reached the bottom. I'd be very leary of placing anything on the face of the stamps. I suspect if you try to peel it all off the backing that the stamps will fall out of place. You could glue the backing to the cover but each individual stamp is easily removable, unless thats what you intend. John Eric Kenneth Bustad wrote: I would like to create a cover using the upcoming US "Northeast Deciduous Forest" sheet, P/O the "Nature of Amarica" series. This will have a single design over the entire sheet, with 10 individual die-cut stamps scattered over it. All self-adhesive. Can people tell me what methods they have used to attach an entire sheet like this to a cover? I can see a few possiblities: 1) Carefully peeling off the entire backing paper w/o separating any stamps and applying the (hopefully) fully intact front to the cover using the self-stick glue. 2) Using glue to attach the whole sheet, including the backing paper, to the cover Does anyone have any better ideas? |
#4
|
|||
|
|||
I suppose the "Post-it" type tape might be reasonably safe.
= Eric In article , Ada Prill wrote: I have NOT tried this myself, but I have been told that if one puts multiple strips of peelable tape across the stamps on such a sheet (on the front), temporarily holding them in place with respect to the surrounding paper, that it becomes much easier to peel the backing away without dislodging the stamps from their position on the sheetlet. As soon as the intact sheetlet is attached to a cover, remove the peelable tape so it doesn't stick itself down more firmly. As I said, I haven't tried it, but it seems worth considering. Ada "Eric Kenneth Bustad" wrote in message ... I would like to create a cover using the upcoming US "Northeast Deciduous Forest" sheet, P/O the "Nature of Amarica" series. This will have a single design over the entire sheet, with 10 individual die-cut stamps scattered over it. All self-adhesive. Can people tell me what methods they have used to attach an entire sheet like this to a cover? I can see a few possiblities: 1) Carefully peeling off the entire backing paper w/o separating any stamps and applying the (hopefully) fully intact front to the cover using the self-stick glue. 2) Using glue to attach the whole sheet, including the backing paper, to the cover Does anyone have any better ideas? -- = Eric Bustad, Norwegian bachelor programmer |
#5
|
|||
|
|||
That is exactly the kind of tape I meant.
Ada "Eric Kenneth Bustad" wrote in message ... I suppose the "Post-it" type tape might be reasonably safe. = Eric In article , Ada Prill wrote: I have NOT tried this myself, but I have been told that if one puts multiple strips of peelable tape across the stamps on such a sheet (on the front), temporarily holding them in place with respect to the surrounding paper, that it becomes much easier to peel the backing away without dislodging the stamps from their position on the sheetlet. As soon as the intact sheetlet is attached to a cover, remove the peelable tape so it doesn't stick itself down more firmly. As I said, I haven't tried it, but it seems worth considering. Ada "Eric Kenneth Bustad" wrote in message ... I would like to create a cover using the upcoming US "Northeast Deciduous Forest" sheet, P/O the "Nature of Amarica" series. This will have a single design over the entire sheet, with 10 individual die-cut stamps scattered over it. All self-adhesive. Can people tell me what methods they have used to attach an entire sheet like this to a cover? I can see a few possiblities: 1) Carefully peeling off the entire backing paper w/o separating any stamps and applying the (hopefully) fully intact front to the cover using the self-stick glue. 2) Using glue to attach the whole sheet, including the backing paper, to the cover Does anyone have any better ideas? -- = Eric Bustad, Norwegian bachelor programmer |
#6
|
|||
|
|||
Removing the backing paper and then applying the whole sheet to a cover
is very tricky. The best and quickest method I have found is to sandpaper the backing paper. Sandpaper an inch or so in from the edges and then some spots in the middle, no need to sandpaper 100% of the surface. Then apply archival type glue. Since the backing now has a rough surface, it will stick to the envelope easily and not peel. Cheers, Paul |
#7
|
|||
|
|||
I missed the first message, but I would never use sandpaper and glue!
Here's the method I used for the Lunar New Year souvenir sheets: I applied Scotch "Post-It" removable tape across the block of stamps, to keep the stamps together and with the surrounding selvage. Then I carefully peeled the sheet away from the backing paper, starting at the edge. I've also found that working upside down -- that is, with the stamps face down on the table, and peeling the backing paper up and away from the stamps -- works better than pulling on the selvage and stamps. Lloyd A. de Vries Dragon Cards www.dm.net/~lloyd |
#8
|
|||
|
|||
In article ,
Lloyd de Vries wrote: I missed the first message, but I would never use sandpaper and glue! Here's the method I used for the Lunar New Year souvenir sheets: I applied Scotch "Post-It" removable tape across the block of stamps, to keep the stamps together and with the surrounding selvage. Then I carefully peeled the sheet away from the backing paper, starting at the edge. I've also found that working upside down -- that is, with the stamps face down on the table, and peeling the backing paper up and away from the stamps -- works better than pulling on the selvage and stamps. As the one who originally asked the question, thanks! -- = Eric Bustad, Norwegian bachelor programmer |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Commemorative and Promo Sheets For TRADE | James T. Murdock Jr. | Hockey | 1 | April 14th 13 08:07 PM |
FS: Baseball "Sports Illustrated" Magazine (Back Issues) | J.R. Sinclair | Baseball | 0 | August 23rd 04 05:00 AM |
FS: Toronto Maple Leaf Programs/Yearbooks (Back Issues) | J.R. Sinclair | Hockey | 1 | May 13th 04 01:28 PM |
FA: SPORTS 23 MAG LT-Spahn/Unitas/Rizzuto Cvs/Mostly 50s ENDS TODAY 4/14 | tmantrask | Football (US) | 0 | April 14th 04 11:58 AM |
FA: SPORTS 23 MAG LT-Spahn/Unitas/Rizzuto Cvs/Mostly 50s Updated 4/12 | tmantrask | Football (US) | 0 | April 12th 04 03:07 PM |