|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
November 18th 08, 05:32 PM
|
|||
|
|||
Seeburg LPC1 1963
I have a Seeburg LPC1 1963. It plays 45's at 33 1/3 speed.
I found the two speed control transistors faulty. The P/N is GC-433. I cannot find these germanium transistors.Does anyone have any suggestions or a cross referance. THX 
|
| Ads |
|
#2
November 18th 08, 08:54 PM
posted to alt.collecting.juke-boxes
|
|||
|
|||
|
Seeburg LPC1 1963
www.victoryglass.com
VG part # 60-3456 (AMR stock #R-8) Seeburg Semi-conductor cross reference replacement Guidebook (60 pages) $20.00
|
|
#3
November 23rd 08, 08:29 AM
posted to alt.collecting.juke-boxes
|
|||
|
|||
|
Seeburg LPC1 1963
I always use AD149 an these work perfectly well are currently available here in Europe Leon "Ken Layton" schreef in bericht ... www.victoryglass.com VG part # 60-3456 (AMR stock #R-8) Seeburg Semi-conductor cross reference replacement Guidebook (60 pages) $20.00
|
|
#4
November 23rd 08, 10:25 PM
posted to alt.collecting.juke-boxes
|
|||
|
|||
|
Seeburg LPC1 1963
Ken Layton wrote:
www.victoryglass.com VG part # 60-3456 (AMR stock #R-8) Seeburg Semi-conductor cross reference replacement Guidebook (60 pages) $20.00 http://flippers.com/seeburgx.html I've had that list up for about five years now... John :-#)# -- (Please post followups or tech inquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out."
|
|
#5
November 24th 08, 01:35 AM
posted to alt.collecting.juke-boxes
|
|||
|
|||
|
Seeburg LPC1 1963
On Nov 18, 12:32*pm, jmarion
wrote: I have a Seeburg LPC1 1963. It plays 45's at 33 1/3 speed. I found the two speed control transistors faulty. The P/N is GC-433. I cannot find these germanium transistors.Does anyone have any suggestions or a cross referance. THX -- jmarion The last switch in the cam switch stack isn't working or the switch on the side of the platter isn't working correctly. I've fixed one with this problem before. -Ron
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Seeburg Console - LPC1 | Teddy | Juke Boxes | 1 | July 13th 07 04:38 AM |
| wtb: Good button panel for an LPC1 | J.C. | Juke Boxes | 0 | June 5th 07 12:22 AM |
| Seeburg LPC1 | [email protected] | Juke Boxes | 0 | January 30th 06 12:45 AM |
| TECH:Seeburg LPC1 Jukebox "Sits and Spins" | Rick Murillo \(Starstream\) | Juke Boxes | 1 | April 3rd 05 05:03 PM |
| parting out LPC1 | Flats | Juke Boxes | 0 | March 16th 04 12:45 PM |
Linear Mode
