If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
seeburg 222 mech. removal
Hi All,
How do I get the entire mech assy out of the cabinet? It won't slide out the back and the selector assy is in the way on the front. I assume that has to be removed, but how? The manual doesn't go into that. Thank you, Rick. |
Ads |
#2
|
|||
|
|||
seeburg 222 mech. removal
Hi Rick,
I don't have 222, but I just went out to look at my 220 after I read your post. On my 220, the selector assembly is not in the way. After the trim is removed from around the mech (and all the connecting cables are disconnected from the amp and the control center), on the 220 it just slides out the front (remove pins which secure mech base into guide slots/rails.) The selector is below all of this, as it is built into the chrome of the cabinet below where the mech slides out. Whatever you do, don't pull the mech by the "selection now playing" indicator bar....pull from behind the bar on the metal parts of the mech base. As you begin to pull the mech forward, toward the point where the front edges of the mech would hit the selector chrome area, there will be enough "play" to lift up and get the mech over the edge of the chrome. It's a good idea to have a friend (or spouse) help you as you do this; not just for the weight, but also in case a connecter or plug gets "hung up", or caught along the way. Hope this helps, Rob Hi All, How do I get the entire mech assy out of the cabinet? It won't slide out the back and the selector assy is in the way on the front. I assume that has to be removed, but how? The manual doesn't go into that. Thank you, Rick. |
#3
|
|||
|
|||
seeburg 222 mech. removal
Thank you for that detailed info. It does help alot Rick.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tech: Seeburg Mech: after the cleaning | Ace | Juke Boxes | 4 | December 9th 04 01:54 PM |
Cleaning Seeburg R mech end plastics | mikke | Juke Boxes | 1 | March 15th 04 01:11 PM |
WTB: Seeburg R Mech Cover and/or Medallion | CraigBurnett | Juke Boxes | 0 | January 16th 04 07:28 PM |
Looking for Seeburg R Mech Cover | CraigBurnett | Juke Boxes | 0 | December 17th 03 04:51 AM |
Wurlitzer 1100 Mech Removal | Jim Jackson | Juke Boxes | 3 | October 4th 03 06:53 AM |