If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
CityII and PrestigeII have that switch,(maybe a jumper?) , but the Prestige
does not. It only uses the AC mech, unless the centrale has been changed out for a newer one. I think a replacement mech is called for in this case. I am sure it is wrong for this machine. Mike "Russel Willoughby" wrote in message ... On Wed, 13 Aug 2003 19:15:43 GMT, "Merlin Amusements" wrote: Definitely the wrong mech. Should be an AC controlled mech with the reversing switch on the left side. Yes, I did a service call on one of those Prestiges a while back. It was in pretty poor shape. I believe the plastic bracket that held the reversing switch in place was completely destroyed. It had been glued back together multiple times, and it was beyond all hope of ever holding together again. Is it possible to use the later-style mech in this machine? I seem to recall that City II's have a jumper option on the amp to select AC or DC motor operation -- maybe this box has that too. The reversing switch might be tougher to get around, though. Probably best to just buy another carriage. At least the one he has will be good for spare parts! |
Ads |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NSM Prestige es160 | Mark | Juke Boxes | 3 | January 20th 11 11:01 AM |
NSM Prestige ES160 Tweeters? | ThomasNews | Juke Boxes | 0 | July 17th 03 12:37 PM |