Rockola1468-record doesn't eject

I just got a rockola 1468 Tempo and it's working well except for occasionally when the record gets to the end, it keeps spinning and I have to open up the top and manually nudge the arm to get it to eject. Any help on how to solve this problem or what it could be?

On Jan 13, 4:58*pm, smazik
wrote:
I just got a rockola 1468 Tempo and it's working well except for
occasionally when the record gets to the end, it keeps spinning and I
have to open up the top and manually nudge the arm to get it to eject.
Any help on how to solve this problem or what it could be?

--
smazik

It's a simple adjustment.I'm not exactly sure where your adjustment
is,but your manuel will tell you.
It's at the tomearm adjustments where it lifts and sets your tonearm
on the record.
If you don't have a manuel,you'll need one.That's the first thing you
need to purchase after getting your box.

On Jan 13, 5:58*pm, smazik
wrote:
I just got a rockola 1468 Tempo and it's working well except for
occasionally when the record gets to the end, it keeps spinning and I
have to open up the top and manually nudge the arm to get it to eject.
Any help on how to solve this problem or what it could be?

--
smazik

You don't need a manual for this..it's very simple.

You need to adjust and possibly clean the trip contacts that are
actuated by the tonearm. They are under the mechanism decorative cover
and right under the tonearm itself.

You'll need to remove the cover. Pick the turntable up and off, then
remove the screws holding the cover on. You may need to lift the
tonearm to slip the cover off. Then look below the arm and find two
"leaf" blades that the tonearm assembly pushes together at the end of
a record. Just a -slight- adjustment will be needed. It is done by
gently bending the blades so that the contacts meet slightly sooner.

Once you have the cover off it will be obvious


Rob