If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Seeburg V200 drum tech help
Have an issue with a V200 drum. The drum operates fine except for the very left selection button. When selecting the far left button the motor for the drum spins very slow and does not extend all the way out to engage the clutch to move the drum is almost like the circuit for that selection has to much resistance in it. Some times it will chatter and then work. I replaced the far left arrow switch with an NOS one I had. I cleaned the two switches at the right side of the drum, I know the one is a motor switch. All other 4 arrow selections operate the motor very strongly. Any ideas, Thanks in advance.
|
Ads |
#2
|
|||
|
|||
Seeburg V200 drum tech help
On 2019/01/24 3:14 a.m., I buy Pinballs wrote:
Have an issue with a V200 drum. The drum operates fine except for the very left selection button. When selecting the far left button the motor for the drum spins very slow and does not extend all the way out to engage the clutch to move the drum is almost like the circuit for that selection has to much resistance in it. Some times it will chatter and then work. I replaced the far left arrow switch with an NOS one I had. I cleaned the two switches at the right side of the drum, I know the one is a motor switch. All other 4 arrow selections operate the motor very strongly. Any ideas, Thanks in advance. Check the drum plug connector and socket, may have a damaged or corroded pin - which can reduce the current available to the motor by increased resistance at the plug. If you can't find the problem visually, then do a voltage drop measurement between the left switch and the motor and compare to the next switch in. There should be almost no voltage drop between the switch and the motor - well under 1.00VAC! John :-#)# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 (604)872-5757 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#3
|
|||
|
|||
Seeburg V200 drum tech help
On Thursday, January 24, 2019 at 6:14:38 AM UTC-5, I buy Pinballs wrote:
Have an issue with a V200 drum. The drum operates fine except for the very left selection button. When selecting the far left button the motor for the drum spins very slow and does not extend all the way out to engage the clutch to move the drum is almost like the circuit for that selection has to much resistance in it. Some times it will chatter and then work. I replaced the far left arrow switch with an NOS one I had. I cleaned the two switches at the right side of the drum, I know the one is a motor switch. All other 4 arrow selections operate the motor very strongly. Any ideas, Thanks in advance. John, thanks for the tech advice. I was trouble shooting the switches with the arrows on them, the dirty contacts were the ones on the far left of the drum. I thought the switches were for just the indicator lights but each one was a double switch. One good cleaning on them and the drum operates great. Thanks for your help. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Needed: Seeburg V200 or VL200 drum and other V200 parts | Nimko | Juke Boxes | 0 | June 1st 08 12:11 PM |
WANTED: V200 or VL200 drum and green side glas | Nimko | Juke Boxes | 0 | May 2nd 08 09:14 AM |
FA: Seeburg V200 drum (1955) | John Robertson | Juke Boxes | 0 | October 30th 07 05:38 AM |
FS: Seeburg V200 Drum unit, refurbished | Ian_UK | Juke Boxes | 0 | April 26th 06 08:36 PM |
Selection Drum Seeburg V, VL, KD | DE2121 | Juke Boxes | 5 | April 21st 06 03:16 AM |