If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Sonata 1050 help needed! Still
I've this beast in the shop now and the question I have is this: During
transfer from the carousel to the platter, I notice the spindle come up slightly, mid-arch, then drop below the level of the 45 being played before end of cycle, thus resulting in the record not being centered perfectly. I've looked at the cam lobe, looks fine but maybe not adjusted quite right. Gonna try some tinkering this afternoon. Also, this box has several microswitch issues I'm resolving as well. Are those stupid plastics where the fluorescents are mounted in the upper portion of the door available? I realise these boxes were made in Mexico, there is a better way of mounting them, isn't there??? Since '73 they've have ample time to dry and become very brittle. I'm not liking this box anymore! Cheers, Steve. |
Ads |
#2
|
|||
|
|||
Try Victory Glass for the plastics. I know they had ones for the Wurlitzer and Rockola. Sonata should be the same, but all these plastics needed a little trimming down. Charlie Maier |
#3
|
|||
|
|||
On 2005-05-23 17:57:05 -0700, "Juke Dude" said:
I've this beast in the shop now and the question I have is this: During transfer from the carousel to the platter, I notice the spindle come up slightly, mid-arch, then drop below the level of the 45 being played before end of cycle, thus resulting in the record not being centered perfectly. I've looked at the cam lobe, looks fine but maybe not adjusted quite right. Gonna try some tinkering this afternoon. Also, this box has several microswitch issues I'm resolving as well. Are those stupid plastics where the fluorescents are mounted in the upper portion of the door available? I realise these boxes were made in Mexico, there is a better way of mounting them, isn't there??? Since '73 they've have ample time to dry and become very brittle. I'm not liking this box anymore! Cheers, Steve. Hi Steve, All microswitches need to be tested on these older machines, you will often find several that are marginal. Go to http://www.flippers.com/juke-tip.html and read my section on testing mciroswitches. As for the gripper arm drooping, I'm not sure what could cause this - perhaps you can send me a picture of the arm (freeze it with the service switch) and I would be happy to make an educated guess. We make replacement plastics for the pilasters for the Sonata. John :-#)# -- (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sonata 1050 Problem??? Please, some input needed. | Juke Dude | Juke Boxes | 0 | May 20th 05 12:55 PM |
Wurlitzer 1050 info needed? possibly selling | MikeBfBsDy | Juke Boxes | 1 | December 25th 04 12:17 PM |
Wurlitzer 1050 Lower Title Strip Holder Needed | JP White | Juke Boxes | 0 | May 29th 04 12:16 AM |
* PART 1 - ACTION PACKED to PACIFIC - MAKE ME AN OFFER!! * | MIke Bird | Football (US) | 0 | November 19th 03 04:56 AM |
* PART 1 - ACTION PACKED to PACIFIC - MAKE ME AN OFFER!! * | MIke Bird | Football (US) | 0 | November 9th 03 04:25 AM |