A collecting forum. CollectingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CollectingBanter forum » Collecting newsgroups » Juke Boxes
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Seeburg HF100R DIY Cabinet Laminate Kits....



 
 
Thread Tools Display Modes
  #21  
Old December 20th 12, 03:38 AM
JeffP JeffP is offline
Member
 
First recorded activity by CollectingBanter: Nov 2012
Location: Ringwood NJ 07456
Posts: 42
Default

Quote:
Originally Posted by Terry S View Post
On Dec 11, 9:33*pm, JeffP wrote:
Here is an update,

I have finished making the 2 hardest wooden templates For the HR100R.

The White section is dead on accurate when compared with 2 of my
HF100R’s jukeboxes especially in regards to the front edge where it
meets the Brown and the Cash Box door Trim.

I think when you enlarge the photos of the cash box door trim section
you will be pleasantly surprised on how nice and small the gap actually
is between the trim and the White Laminate.

The Brown section is dead on accurate when compared to a late 1990’s
leftover kit piece that I had laying around.

I still have to make a jig for the sections that go between the fluted
glass pieces and the 2 little strips that go on the top of the Brown
hockey sticks for lack of a better word

Hope you enjoy these pictures.
Talk to you soon.
Jeff P.

+-------------------------------------------------------------------+
|Filename: IMG_1156.JPG * * * * * * * * * * * * * * * * * * * * * * |
|Download:http://www.collectingbanter.com/attachment.php?attachmentid=263|
+-------------------------------------------------------------------+

--
JeffP


Jeff, when do you anticipate kits will be available? I could start
taking apart my R, but I don't really want it spread out across the
basement for weeks :-)

Terry
Hi Terry, I built the templates and cut the formica pieces out already... I checked all the pieces against 2 of my HF100Rs' and they are a perfect fit..

I bought 20 shipping boxes from Uline http://www.uline.com/Product/Detail/...y-Fold-Mailers
and I received them today. With Shipping and Tax for these boxes my bill was $185.00 so thats $10.00 a box that will be added to the Kits shipping charges. Multiple kits can definitely fit in one box as these boxes are 200# test and are adjustable up to 6 inches in depth.

I built a jig to heat the brown pieces up so that they can be bent. Luckily I used scrap pieces of burl to test this procedure because I cracked a few pieces and melted a few others. I think I finally figured out how hot the gun needs to be and how long the heat needs to be applied.

At his point I bought one 4 x 8 sheet of White and one 4 x 8 sheet of Brown which gave me 3 sets of White materials and 4 or 5 sets of Brown materials.

So I basically have 3 complete kits at this time.

Given that, I have 2 sets sold to Jay from California which leaves me with one set left over from the first batch.

The 3rd set will go on a first come first go basis based upon who's check clears first.

At this point, all the hard work has been done and all the ducks are lined up so I can reproduce these kits with a few days turnaround. This is possible because all the materials are readily available from my local distributor and all the templates and jigs are already made and have been proven.

Oh... I still have to cut out the little pieces that go on the ends of the title strip holders as well as the pieces that go between the fluted glasses and top and front side of the Brown Hockey sticks. This process should go pretty quickly as I purchased a heavy duty Guillotine cutter specifically for these pieces.

So to answer your question, If you send me the $325.00 plus the boxing and shipping fees from 07456 to your house, even if I dont have a kit made when I receive the money, by the time the check clears I should have a kit ready for shipping.

Current "Potential Buyers/Interested Parties" information that I have:

2 kits for Jay from California, Have email, shipping address and phone number

1 kit for WildBill, Have email

1 kit for Nmacrae from Minnesota, Have email

1 kit for Terry S, Have no information

1 kit for CoinOpNY, Have email, shipping address and phone number

1 kit for Nigel from UK, Have email

1 kit (Maybe) for Dziedzk, Have email

Just as a side note.... my kits will come with a 100% Satisfaction
Guarantee.... If for any reason anyone who buys a kit from me is not 100%
satisfied for any reason, As long as they return the entire kit to me
un-used, I will gladly reimburse them the money spent for the kit.

You are always welcome to contact me over the phone with any questions that you may have or you can also email me at:

TribalRoadKing “insert at sign” OptOnline “insert dot” Net

Payments can also be made using "PayPal"
.
Thanks for your interest

Jeff Pluchino
68 Cheshire Lane
Ringwood NJ 07456
973 962-6654

Last edited by JeffP : January 26th 13 at 06:02 AM.
Ads
  #22  
Old January 5th 13, 06:09 AM
TimS TimS is offline
Junior Member
 
First recorded activity by CollectingBanter: Jan 2013
Posts: 2
Thumbs up

Hi Jeff, Can't wait for the kit to show up.
Quote:
Originally Posted by JeffP View Post
Hi Terry, I built the templates and cut the formica pieces out already... I checked all the pieces against 2 of my HF100Rs' and they are a perfect fit..

I bought 20 shipping boxes from Uline http://www.uline.com/Product/Detail/...y-Fold-Mailers
and I received them today. With Shipping and Tax for these boxes my bill was $185.00 so thats $10.00 a box that will be added to the Kits shipping charges. Multiple kits can definitely fit in one box as these boxes are 200# test and are adjustable up to 6 inches in depth.

I built a jig to heat the brown pieces up so that they can be bent. Luckily I used scrap pieces of burl to test this procedure because I cracked a few pieces and melted a few others. I think I finally figured out how hot the gun needs to be and how long the heat needs to be applied.

At his point I bought one 4 x 8 sheet of White and one 4 x 8 sheet of Brown which gave me 3 sets of White materials and 4 or 5 sets of Brown materials.

So I basically have 3 complete kits at this time.

Given that, I have 2 sets sold to Jay from California which leaves me with one set left over from the first batch.

The 3rd set will go on a first come first go basis based upon who's check clears first.

At this point, all the hard work has been done and all the ducks are lined up so I can reproduce these kits with a few days turnaround. This is possible because all the materials are readily available from my local distributor and all the templates and jigs are already made and have been proven.

Oh... I still have to cut out the little pieces that go on the ends of the title strip holders as well as the pieces that go between the fluted glasses and top and front side of the Brown Hockey sticks. This process should go pretty quickly as I purchased a heavy duty Guillotine cutter specifically for these pieces.

So to answer your question, If you send me the $250.00 plus the boxing and shipping fees from 07456 to your house, even if I dont have a kit made when I receive the money, by the time the check clears I should have a kit ready for shipping.

Current "Potential Buyers/Interested Parties" information that I have:

2 kits for Jay from California, Have email, shipping address and phone number

1 kit for WildBill, Have email

1 kit for Nmacrae from Minnesota, Have email

1 kit for Terry S, Have no information

1 kit for CoinOpNY, Have email, shipping address and phone number

1 kit for Nigel from UK, Have email

1 kit (Maybe) for Dziedzk, Have email

Just as a side note.... my kits will come with a 100% Satisfaction
Guarantee.... If for any reason anyone who buys a kit from me is not 100%
satisfied for any reason, As long as they return the entire kit to me
un-used, I will gladly reimburse them the money spent for the kit.

You are always welcome to contact me over the phone with any questions that you may have or you can also email me at:

TribalRoadKing “insert at sign” OptOnline “insert dot” Net

Payments can also be made using "PayPal"
.
Thanks for your interest

Jeff Pluchino
68 Cheshire Lane
Ringwood NJ 07456
973 962-6654
  #23  
Old January 5th 13, 07:54 PM
JeffP JeffP is offline
Member
 
First recorded activity by CollectingBanter: Nov 2012
Location: Ringwood NJ 07456
Posts: 42
Default

Quote:
Originally Posted by TimS View Post
Hi Jeff, Can't wait for the kit to show up.
Hey Tim... Its in transit....

Scheduled Delivery:
Thursday, 01/10/2013, By End of Day

I sent you the UPS tracking numbers,

Let me know when it arrives

Last edited by JeffP : January 5th 13 at 07:57 PM.
  #24  
Old January 9th 13, 10:54 PM
TimS TimS is offline
Junior Member
 
First recorded activity by CollectingBanter: Jan 2013
Posts: 2
Default

Quote:
Originally Posted by JeffP View Post
Hey Tim... Its in transit....

Scheduled Delivery:
Thursday, 01/10/2013, By End of Day

I sent you the UPS tracking numbers,

Let me know when it arrives
Hi Jeff,

The kit arrived a little while ago. Excellent packing job by the way! I got everything out of the box and laid it on the floor...OUTSTANDING! What craftsmanship.... The burl is beautiful, and the white is perfect! Everything looks perfectly cut and should look fantastic on a grade one "R". I sent pics to another gentleman here in AZ who does restorations.

Anyone who buys this kit will be 100% satisfied. All I need now is the R to put it on...sometimes it seems like I am chasing a unicorn.

Thanks Jeff



  #25  
Old January 10th 13, 12:16 AM
JeffP JeffP is offline
Member
 
First recorded activity by CollectingBanter: Nov 2012
Location: Ringwood NJ 07456
Posts: 42
Default

Quote:
Originally Posted by TimS View Post
Hi Jeff,

The kit arrived a little while ago. Excellent packing job by the way! I got everything out of the box and laid it on the floor...OUTSTANDING! What craftsmanship.... The burl is beautiful, and the white is perfect! Everything looks perfectly cut and should look fantastic on a grade one "R". I sent pics to another gentleman here in AZ who does restorations.

Anyone who buys this kit will be 100% satisfied. All I need now is the R to put it on...sometimes it seems like I am chasing a unicorn.

Thanks Jeff



Thank you so much for the positive feedback Tim!

I am so happy that you like it.

Please keep me in the loop for your quest in looking for an R and I will continue to look for an "R" for you as well....
  #26  
Old January 26th 13, 04:15 AM
JeffP JeffP is offline
Member
 
First recorded activity by CollectingBanter: Nov 2012
Location: Ringwood NJ 07456
Posts: 42
Default

Just an update....

I recently sold all of the laminate kits that I previously had available.

Today I picked up all the materials necessary for another batch of about 10 HF100R laminate kits....

This batch will be using the same Burl that I used in the past but instead of using the Burl in a Matte finish, I went ahead and "Special Ordered" the same Burl in a Glossy Finish.

I really like the way this Burl looks in a Glossy Finish and I am sure that you will too.

In addition, Unless you are one of those people that are on my waiting list for a kit, All new kits will be $325.00 plus Shipping and Handling and PayPal expenses.


Just as a side note....
My kits will come with a 100% Satisfaction Guarantee....
If for any reason anyone who buys a kit from me is not 100% Satisfied for any reason,
As long as they return the entire kit to me Un-Used,
I will gladly reimburse them the money spent for the kit.

You are always welcome to contact me over the phone with any questions that you may have or you can also email me at:

TribalRoadKing “insert at sign” OptOnline “insert dot” Net

Payments can be made using "PayPal".

Thanks for your interest

Jeff Pluchino
68 Cheshire Lane
Ringwood NJ 07456
973 962-6654

Last edited by JeffP : January 26th 13 at 04:19 AM.
  #27  
Old December 27th 19, 03:07 AM posted to alt.collecting.juke-boxes
[email protected]
external usenet poster
 
Posts: 1
Default Seeburg HF100R DIY Cabinet Laminate Kits....

On Tuesday, November 27, 2012 at 2:03:15 PM UTC-5, JeffP wrote:
Seeburg HF100R DIY Cabinet Laminate Kits....

I have 3 or 4 1954 Seeburg HF100R Jukeboxes that I will be restoring
over this winter. I have made jigs/templates and will be cutting out
Laminate for these specific boxes and I was wondering if there was a
demand out there for Seeburg HF 100 R DIY Kits.

The kit will contain all the same pieces found in this photo below minus
the cashbox door piece.

Depending on interest I may be able to offer various colors.

If anyone is interested in buying a kit you can give me a call at 973
962-6654 Thanks Jeff P.


+-------------------------------------------------------------------+
|Filename: all_panels800.jpg |
|Download: http://www.collectingbanter.com/attachment.php?attachmentid=251|
+-------------------------------------------------------------------+



--
JeffP


Yes, I am definitely interested in the DYI kit for the R. Please let me know if you do it. Thanks
  #28  
Old January 2nd 20, 08:47 AM posted to alt.collecting.juke-boxes
Jay Hennigan
external usenet poster
 
Posts: 1
Default Seeburg HF100R DIY Cabinet Laminate Kits....

On 2019-12-27 03:07:54 +0000, said:

Yes, I am definitely interested in the DYI kit for the R. Please let
me know if you do it. Thanks


Jeff Pluchino has been making them for quite a while, excellent quality.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
SEEBURG R, LAMINATE KITS [email protected] Juke Boxes 0 February 27th 06 10:31 PM
SEEBURG 100R LAMINATE KITS [email protected] Juke Boxes 2 December 20th 05 07:36 PM
SEEBURG R LAMINATE KITS Wayne Juke Boxes 0 August 15th 05 04:17 PM
Seeburg R Laminate Kits - Any Opinions? [email protected] Juke Boxes 1 August 11th 05 12:24 AM
Seeburg Model 100R Laminate Kit Wayne Juke Boxes 3 December 1st 04 10:31 PM


All times are GMT +1. The time now is 10:23 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright ©2004-2020 CollectingBanter.
The comments are property of their posters.