ami d-80 problems

im working on an ami d-80. when i power it up the only thing that works is the right bank start switch which starts to carriage motor when closed. it seems that i dont have power to the left starting switch or the switches on the end of the carriage. i have voltage to the no 3 terminal on the reverse switch plug but none on the other three terminals for that plug. the wiring all looks very good. im not blowing any fuses. any help ia appreciated. thanks norm

On Jun 3, 3:48*am, wrote:
im working on an ami d-80. when i power it up the only thing that works is the right bank start switch which starts to carriage motor when closed. *it seems that i dont have power to the left starting switch or the switches on the end of the carriage. i have voltage to the no 3 terminal on the reverse switch plug but none on the other three terminals for that plug. the wiring all looks very good. im not blowing any fuses. any help ia appreciated. *thanks norm



Not familiar with the D - but on my G-80 I had problems with that
figure 8 mains cord they used cracking and breaking internally. This
was also used to wire to those start switches, so check that its ok
from end to end. Check especially where it goes to the moving
turntable assembly, these break from flexing all the time as the
turntable moves on its rails.