If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Need a bushing
I have a Wurlitzer 1450 and I need to replace the bushing for the Selector Cam Assembly? I contacted Victory Glass but they do not carry the part. If anyone knows of a supplier or has any other ideas they would be greatly appreciated.
Thanks |
#2
|
|||
|
|||
Need a bushing
On Sunday, January 24, 2016 at 7:54:01 PM UTC-6, wrote:
I have a Wurlitzer 1450 and I need to replace the bushing for the Selector Cam Assembly? I contacted Victory Glass but they do not carry the part. If anyone knows of a supplier or has any other ideas they would be greatly appreciated. Thanks I have a bunch of misc parts from a 1400 on ebay. just type in wurltizer jukebox |
#3
|
|||
|
|||
Need a bushing
On 01/24/2016 5:54 PM, wrote:
I have a Wurlitzer 1450 and I need to replace the bushing for the Selector Cam Assembly? I contacted Victory Glass but they do not carry the part. If anyone knows of a supplier or has any other ideas they would be greatly appreciated. Thanks If you have the part number then check my site - I have a lot of Wurlitzer parts up that are NOS. http://www.flippers.com/catalog/inde...zer-c-23_33_59 John :-#)# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
Thread Tools | |
Display Modes | |
|
|