A collecting forum. CollectingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CollectingBanter forum » Collecting newsgroups » Juke Boxes
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC



 
 
Thread Tools Display Modes
  #1  
Old June 8th 06, 05:06 AM posted to alt.collecting.juke-boxes
external usenet poster
 
Posts: n/a
Default Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC

I know it takes many pages to tape together but I've done that before. I
have a manual just ordered from Jeff Wager but client pressure to repair it
for the weekend if possible.

Thanks, Al Last

contact me at Remove the (dot) and replace with
..


Ads
  #2  
Old June 9th 06, 06:13 AM posted to alt.collecting.juke-boxes
external usenet poster
 
Posts: n/a
Default Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC

On 2006-06-07 21:06:28 -0700, "Al Last" said:

I know it takes many pages to tape together but I've done that before.
I have a manual just ordered from Jeff Wager but client pressure to
repair it for the weekend if possible.

Thanks, Al Last

contact me at Remove the (dot) and replace with .


Most problems with Wurlitzers are bad or noisy microswitches. I
recommend that you test ECRY microswitch with an ohm-meter before
moving on to other potential issues. The other area to check are the
latch switches on the keyboard, clean them with a points file and
adjust to the manual.

Go to http://www.flippers.com/juke-tip.html and read that page...

John :-#)#
--
(Please post followups or tech enquires to the newsgroup) John's
Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com "Old pinballers never die, they
just flip out."

  #3  
Old June 9th 06, 08:25 PM posted to alt.collecting.juke-boxes
external usenet poster
 
Posts: n/a
Default Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC

On 2006-06-08 22:13:00 -0700, John Robertson said:

On 2006-06-07 21:06:28 -0700, "Al Last" said:

I know it takes many pages to tape together but I've done that before.
I have a manual just ordered from Jeff Wager but client pressure to
repair it for the weekend if possible.

Thanks, Al Last

contact me at Remove the (dot) and replace with .


Most problems with Wurlitzers are bad or noisy microswitches. I
recommend that you test ECRY microswitch with an ohm-meter before
moving on to other potential issues. The other area to check are the
latch switches on the keyboard, clean them with a points file and
adjust to the manual.

Go to http://www.flippers.com/juke-tip.html and read that page...

John :-#)#


Typo...sigh... meant "test EVERY microswitch"

John :-#)#
--
(Please post followups or tech enquires to the newsgroup) John's
Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com "Old pinballers never die, they
just flip out."

  #4  
Old June 9th 06, 08:46 PM posted to alt.collecting.juke-boxes
external usenet poster
 
Posts: n/a
Default Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC

Thanks John for the advise. Yes I agree with you on the microsw problems. I
too have repaired many of the 3000 and american series. More than I really
want to admit to. I promised the wife I'd NEVER bring another of that series
in our garage again. Oh well, the things ya do for a buck. I have most of
the 1800-3700 manuals except the diac 3500. It is slightly different credit
accumulator. I already checked and replace about 4 micros last week. I've
adjusted and cleaned the selection panel and relay contacts etc. I need to
check the timing of the sw closures under the keyboard as I think RY2 START
relay isn't getting a chance to lock in fast enough to allow the stepper to
register the XY selection, rotate to it's location, and punch in the pin.

I'm working on it as I write this email so probably have it repaired before
manual arrives from Jeff Wager monday.

Thanks again, Al Last pins4us
"John Robertson" wrote in message
news:[email protected]
On 2006-06-08 22:13:00 -0700, John Robertson said:

On 2006-06-07 21:06:28 -0700, "Al Last" said:

I know it takes many pages to tape together but I've done that before. I
have a manual just ordered from Jeff Wager but client pressure to repair
it for the weekend if possible.

Thanks, Al Last

contact me at Remove the (dot) and replace
with .


Most problems with Wurlitzers are bad or noisy microswitches. I recommend
that you test ECRY microswitch with an ohm-meter before moving on to
other potential issues. The other area to check are the latch switches on
the keyboard, clean them with a points file and adjust to the manual.

Go to http://www.flippers.com/juke-tip.html and read that page...

John :-#)#


Typo...sigh... meant "test EVERY microswitch"

John :-#)#
--
(Please post followups or tech enquires to the newsgroup) John's Jukes
Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757
or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com
"Old pinballers never die, they just flip out."



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Here ya go; proof of that site Sue H Autographs 0 March 17th 06 10:42 PM
How to install arm on Wurlitzer 3500 Zodiac Kevin Rhinehart Juke Boxes 1 October 29th 05 09:47 AM
Antiquarian Bookman auction site: Beta Test Start July 6 Jonathan Grobe Books 12 July 8th 04 08:03 PM
web site hints needed Massimo at HOME Coins 1 January 27th 04 11:32 AM
8x10 Photo Site Abuse dahoov2 Autographs 5 October 4th 03 06:31 AM


All times are GMT +1. The time now is 09:36 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 CollectingBanter.
The comments are property of their posters.