If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Volume control issue on an STD3
Just bought a Seeburg STD3 from an old guy who used to operate jukeboxes. I'm having a problem with the volume cutting out on the left channel. When the volume is low I have very little sound coming out of the left channel. If I start cranking it up when I get over half way I hear some crackling then I get sound out of the left channel and it works fine. Where do I start?
Thanks, Tony |
Ads |
#3
|
|||
|
|||
Volume control issue on an STD3
On Saturday, October 25, 2014 12:49:27 PM UTC-4, John Robertson wrote:
On 10/25/2014, 4:09 AM, wrote: Just bought a Seeburg STD3 from an old guy who used to operate jukeboxes. I'm having a problem with the volume cutting out on the left channel. When the volume is low I have very little sound coming out of the left channel. If I start cranking it up when I get over half way I hear some crackling then I get sound out of the left channel and it works fine. Where do I start? Thanks, Tony I'd start with the volume control! Find some good quality Control Spray and (De-Oxit or MGs Nu-Trol) and use that on the opening of the pot and turn the volume up/down a few times to clean the wiper surface inside. If that doesn't work, then you probably need a new (or good used) volume control. John :-#)# -- (Please post followups or tech inquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." Thanks, I will try that and see what happens! |
#4
|
|||
|
|||
Volume control issue on an STD3
On Saturday, October 25, 2014 12:49:27 PM UTC-4, John Robertson wrote:
On 10/25/2014, 4:09 AM, wrote: Just bought a Seeburg STD3 from an old guy who used to operate jukeboxes. I'm having a problem with the volume cutting out on the left channel. When the volume is low I have very little sound coming out of the left channel. If I start cranking it up when I get over half way I hear some crackling then I get sound out of the left channel and it works fine. Where do I start? Thanks, Tony I'd start with the volume control! Find some good quality Control Spray and (De-Oxit or MGs Nu-Trol) and use that on the opening of the pot and turn the volume up/down a few times to clean the wiper surface inside. If that doesn't work, then you probably need a new (or good used) volume control. John :-#)# -- (Please post followups or tech inquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." That worked, the volume now behaves just like it should, I used DeOxit. Thanks for the help, I really appreciate it. Tony |
#5
|
|||
|
|||
Volume control issue on an STD3
On 10/29/2014, 4:06 PM, Tony Cape wrote:
On Saturday, October 25, 2014 12:49:27 PM UTC-4, John Robertson wrote: On 10/25/2014, 4:09 AM, wrote: Just bought a Seeburg STD3 from an old guy who used to operate jukeboxes. I'm having a problem with the volume cutting out on the left channel. When the volume is low I have very little sound coming out of the left channel. If I start cranking it up when I get over half way I hear some crackling then I get sound out of the left channel and it works fine. Where do I start? Thanks, Tony I'd start with the volume control! Find some good quality Control Spray and (De-Oxit or MGs Nu-Trol) and use that on the opening of the pot and turn the volume up/down a few times to clean the wiper surface inside. If that doesn't work, then you probably need a new (or good used) volume control. John :-#)# -- (Please post followups or tech inquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." That worked, the volume now behaves just like it should, I used DeOxit. Thanks for the help, I really appreciate it. Tony You are most welcome! John :-#)# -- (Please post followups or tech inquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RO Mono Volume control mod | NJ Mike | Juke Boxes | 3 | April 6th 11 12:29 PM |
volume control HELP!!!!! | elec5765 | Juke Boxes | 1 | October 22nd 09 03:01 PM |
AMI F Volume Control | map55b | Juke Boxes | 2 | June 24th 07 08:54 PM |
FA: VOLUME CONTROL BOX | MARK | Juke Boxes | 0 | October 21st 03 07:16 PM |
FA:VOLUME CONTROL BOX LIKE NEW | MARK | Juke Boxes | 0 | October 17th 03 11:07 PM |