If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rockola microswitch problem
Can anyone help? Ive changed out a microswitch on my 468 thinking that was
the problem. Its the one connected to the tone arm and moves the motors. my problem is that it writes but will not move the motors to select. has anyone got a set of drawings they could post plesase or anyone had a similar problem |
Ads |
#2
|
|||
|
|||
Your temanolgy is confusing. You say it writes, does that mean it moves
the selected pin into the play position? Is a pin in the play position? Does motors not move mean the basket does not rotate to the selected record? Does the turntable or magazine motors run , when you put it in scan? Where is the gripper bow? It must be over the basket, not around the turntable for the basket motor to run. If needed, I can sell you a reprint of the service manual for $35 plus $6 shipping. Charlie Maier |
#3
|
|||
|
|||
hi charlie might you have a r 89 key pad assy with the overlay thanks
sue |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rockola sybaris LED problem | [email protected] | Juke Boxes | 1 | November 18th 04 01:38 AM |
Rockola 430 sound problem | Rabbit in Headlights | Juke Boxes | 1 | November 18th 04 12:18 AM |
Problem with Rockola 424 Princess Royal Gripper | joe blow | Juke Boxes | 4 | March 9th 04 02:57 PM |
Annoying intermittent sound problem - Rockola | Paul Smith | Juke Boxes | 4 | November 20th 03 05:41 AM |
Help: Rockola Sybaris 474 | HCV | Juke Boxes | 10 | August 13th 03 04:02 AM |