Rowe R-82 Problem

Also the gripper doesn't always clear the record will touch the records as
it scans,I can push gear down and ok just does this part time
"Tom" wrote in message
...
quite often will put record back in slot next to correct one

"Tom" wrote in message ...
Also the gripper doesn't always clear the record will touch the records as
it scans,I can push gear down and ok just does this part time
"Tom" wrote in message
...
quite often will put record back in slot next to correct one



I'm new to posting so I will keep it short for a few tries. There are
3 bolts located on the carriage motor assembly loosen these then try
to align the gripper to be in the middle of the space the 45 occupies.
The gripper must not be extending itself all the way out that is why
it is hitting the 45s look at the mechanism and check to see why.