If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rowe AMI Disco 200 R-83 Sound and play issues
Greetings,
A caveat before I begin: This is the first project like this I have ever undertaken and I am not by any stretch of the imagination a "handy man"... I inherited a Rowe AMI R-83 jukebox a few weeks ago. It has been sitting in a barn for 20ish years and to my mild surprise it powered up, selected records and played fairly well. It played the records pretty slowly but after cleaning and lubricating the table, post and pivot points that seems to be fixed. I have three problems that are vexing me: First, when I initially powered it up and played a record it would on occasion get much louder and very "tinny" (lots of treble) there was no rhyme or reason for this that I could tell. After giving the box a good cleaning (unplugging all the fittings, cleaning the connections and reseating them) the volume fluctuation is gone but now it is pretty quiet and the volume doesn't change much when I turn the knob. Second, the sound is very fuzzy. I have purchased several new 45s to play and even the brand new ones sound fuzzy. Third, the juke will play most 45s just fine but on occasion, it will kick one out it has been playing fine in the past. The machine makes clicking noises, almost like there is too much input and then the record gets rejected. I have done the following: Replaced the cartridge and the stylus Unplugged, cleaned and reseated all connectors Cleaned all terminals where wires are connected. Checked the speakers in the main cabinet for damaged cones etc. (if someone could tell me how to get into the lower cabinet where the bass speakers are, I would really appreciate it). The tone switches on the amp don't seem to do anything at all. If I switch it to additional bass or treble nothing seems to happen. The switches are also pretty stiff and hard to move. I would GREATLY appreciate any help that is offered. I would love to get this thing singing sweetly in the basement. |
Ads |
#2
|
|||
|
|||
Quote:
First of all can you let us have the amplifier number (model number) if it is the correct amplifier it will be 125 watt part number 6-07438-01 (the revision number could be different -01 etc). The speaker under the display & keyboard (the only one one on the jukebox withg a foam surround) will have a rotted foam surround, this foam surround can be replaced. The speaker is across both channels. You will have to check the wiring from the cartridge back to the amplifier input for any broken unsoldered connections and that the cartridge phasing is correct, see the manual for this information. On the R-83 both black cables are on the bottom of the cartridge with the red within the same screen above it. When you say it kicks a record out do you mean that the gripper bow trys to pick up the record but instead of going back into the basket it gets thrown of of the turntable into the jukebox cabinet? Regards Alan Alan Hood ami-man UK |
#3
|
|||
|
|||
Quote:
Check the amp for bad solder joints. That is what I found on a R90 last night The pins that the volume control plug on were broke lose on the board Dave |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another Rowe R-91 sound question | sarge74 | Juke Boxes | 7 | September 8th 09 10:27 PM |
Rowe R-91 no right side sound | diverdwn | Juke Boxes | 1 | January 10th 06 01:27 PM |
WTB: Rowe R-84 Disco Lighting Assembly | Retrogameconnection | Juke Boxes | 7 | June 4th 05 04:26 AM |
Rowe R-91 sound problem | diverdwn | Juke Boxes | 12 | March 2nd 05 08:33 AM |
AMI/Rowe R-83 Disco 200 carousel spins, no selection | Vic | Juke Boxes | 7 | February 20th 04 04:28 PM |