If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need of Manufacturer!!! Help!!
Have a new coin album I want to have made. Cannot seem to get any
company here in the U.S. to do it. They are all "in house" and are not open to outsiders like myself. I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. Whether it's here in the U.S. or China, please help! A non- disclosure is required. Annette |
Ads |
#2
|
|||
|
|||
Need of Manufacturer!!! Help!!
"Annette" wrote in message ... Have a new coin album I want to have made. Cannot seem to get any company here in the U.S. to do it. They are all "in house" and are not open to outsiders like myself. I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. Whether it's here in the U.S. or China, please help! A non- disclosure is required. Annette Does your "non-disclosure" requirement prohibit you from describing a bit of what you have in mind? It might help anyone inclined to offer a suggestion. |
#3
|
|||
|
|||
Need of Manufacturer!!! Help!!
Annette wrote:
Have a new coin album I want to have made. Cannot seem to get any company here in the U.S. to do it. They are all "in house" and are not open to outsiders like myself. I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. Whether it's here in the U.S. or China, please help! A non- disclosure is required. Annette Contact David Lange: http://www.coincollectingboards.com/ |
#4
|
|||
|
|||
Need of Manufacturer!!! Help!!
Annette wrote:
Have a new coin album I want to have made. Cannot seem to get any company here in the U.S. to do it. They are all "in house" and are not open to outsiders like myself. I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. Whether it's here in the U.S. or China, please help! A non- disclosure is required. Annette If all the coins are the same size, Dansco sells pages with openings in several millimeter sizes, and will custom print a title on the front and spine of a binder for you. You can then carefully letter underneath the openings with transfer tape or similar product. For a company to make any given album, though, they must first do layout and then jig up, which makes an edition of one on demand a very expensive proposition indeed. On occasion I have had custom Capital Plastics holders made, complete with custom lettering underneath the openings. They are expensive, but worth the price. James |
#5
|
|||
|
|||
Need of Manufacturer!!! Help!!
"Mr. Jaggers" lugburzman[at]yahoo[dot]com wrote in message ... Annette wrote: Have a new coin album I want to have made. Cannot seem to get any company here in the U.S. to do it. They are all "in house" and are not open to outsiders like myself. I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. Whether it's here in the U.S. or China, please help! A non- disclosure is required. Annette If all the coins are the same size, Dansco sells pages with openings in several millimeter sizes, and will custom print a title on the front and spine of a binder for you. You can then carefully letter underneath the openings with transfer tape or similar product. For a company to make any given album, though, they must first do layout and then jig up, which makes an edition of one on demand a very expensive proposition indeed. On occasion I have had custom Capital Plastics holders made, complete with custom lettering underneath the openings. They are expensive, but worth the price. I asked Capital Plastics for a quote on a custom plastic holder for 17 coins. It was about $120 with a lettered title (only). Lettering the coin openings would add another $20-$30 IIRC. Obviously, the coin set would have to be pretty special for that kind of display. www.capitalplastics.com However, with the non-disclosure requirement it's not absolutely clear that Annette is looking for a one-off for personal use. She may be wanting mass production of an album she intends to market. |
#6
|
|||
|
|||
Need of Manufacturer!!! Help!!
On Aug 2, 8:52�am, "Bruce Remick" wrote:
"Annette" wrote in message ... Have a new coin album I want to have made. �Cannot seem to get any company �here in the U.S. to do it. �They are all "in house" and are not open to outsiders like myself. �I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? �It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. � Whether it's here in the U.S. �or China, please help! �A non- disclosure is required. Annette Does your "non-disclosure" requirement prohibit you from describing a bit of what you have in mind? �It might help anyone inclined to offer a suggestion. What I have in mind is a album to collect one certain type of coin. It involves six section not in a row. It is for special album that involves dedications with charities and volumes to come. I really do not want to give out much more because as John Mazer put it, yes, I want to put it out in mass production. I do not want it to become public domain until it hits commerce. I will have to do it all solo, find the manufacturer, distribute, sell, and market the product. I am in contact with a Chinese company now but they may not be able to do it because of it's unique design. So here I am , just looking for that special company that can do this at a decent cost. I appreciate everyones input. Trust me, every clue any one gives me I do not take it with a grain of salt. I am dedicated and relentless to get this album completed. |
#7
|
|||
|
|||
Need of Manufacturer!!! Help!!
On Aug 2, 8:56�am, Edwin Johnston wrote:
Annette wrote: Have a new coin album I want to have made. �Cannot seem to get any company �here in the U.S. to do it. �They are all "in house" and are not open to outsiders like myself. �I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? �It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. � Whether it's here in the U.S. �or China, please help! �A non- disclosure is required. Annette Contact David Lange:http://www.coincollectingboards.com/ Thank you, I am on it! Annette |
#8
|
|||
|
|||
Need of Manufacturer!!! Help!!
On Aug 2, 9:12�am, "Mr. Jaggers" lugburzman[at]yahoo[dot]com wrote:
Annette wrote: Have a new coin album I want to have made. �Cannot seem to get any company �here in the U.S. to do it. �They are all "in house" and are not open to outsiders like myself. �I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? �It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. � Whether it's here in the U.S. �or China, please help! �A non- disclosure is required. Annette If all the coins are the same size, Dansco sells pages with openings in several millimeter sizes, and will custom print a title on the front and spine of a binder for you. �You can then carefully letter underneath the openings with transfer tape or similar product. �For a company to make any given album, though, they must first do layout and then jig up, which makes an edition of one on demand a very expensive proposition indeed. On occasion I have had custom Capital Plastics holders made, complete with custom lettering underneath the openings. �They are expensive, but worth the price. James Thank you James, that is a nice suggestion but I do intend to mass market it. I still will contact Capital Plastics, you never know where it could lead. Annette |
#9
|
|||
|
|||
Need of Manufacturer!!! Help!!
On Aug 2, 10:23�am, "John Mazor" wrote:
"Mr. Jaggers" lugburzman[at]yahoo[dot]com wrote in message ... Annette wrote: Have a new coin album I want to have made. �Cannot seem to get any company �here in the U.S. to do it. �They are all "in house" and are not open to outsiders like myself. �I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? �It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. � Whether it's here in the U.S. �or China, please help! �A non- disclosure is required. Annette If all the coins are the same size, Dansco sells pages with openings in several millimeter sizes, and will custom print a title on the front and spine of a binder for you. �You can then carefully letter underneath the openings with transfer tape or similar product. �For a company to make any given album, though, they must first do layout and then jig up, which makes an edition of one on demand a very expensive proposition indeed. On occasion I have had custom Capital Plastics holders made, complete with custom lettering underneath the openings. �They are expensive, but worth the price. I asked Capital Plastics for a quote on a custom plastic holder for 17 coins. �It was about $120 with a lettered title (only). �Lettering the coin openings would add another $20-$30 IIRC. �Obviously, the coin set would have to be pretty special for that kind of display.www.capitalplastics.com However, with the non-disclosure requirement it's not absolutely clear that Annette is looking for a one-off for personal use. �She may be wanting mass production of an album she intends to market.- Hide quoted text - - Show quoted text - Hello John, yes I do intend to mass market it but also intend to contact capital plastics. Thank you for the input. |
#10
|
|||
|
|||
Need of Manufacturer!!! Help!!
Annette wrote:
On Aug 2, 9:12?am, "Mr. Jaggers" lugburzman[at]yahoo[dot]com wrote: Annette wrote: Have a new coin album I want to have made. ?Cannot seem to get any company ?here in the U.S. to do it. ?They are all "in house" and are not open to outsiders like myself. ?I may need to go overseas but am in need of help if anyone knows af any manufacturer that will make my album? ?It is unique but I have no intetions of giving up. I have contacted, Whitman, Harris, Littleton, Dansco, Anderson Press, to o avail. ? Whether it's here in the U.S. ?or China, please help! ?A non- disclosure is required. Annette If all the coins are the same size, Dansco sells pages with openings in several millimeter sizes, and will custom print a title on the front and spine of a binder for you. ?You can then carefully letter underneath the openings with transfer tape or similar product. ?For a company to make any given album, though, they must first do layout and then jig up, which makes an edition of one on demand a very expensive proposition indeed. On occasion I have had custom Capital Plastics holders made, complete with custom lettering underneath the openings. ?They are expensive, but worth the price. James Thank you James, that is a nice suggestion but I do intend to mass market it. I still will contact Capital Plastics, you never know where it could lead. Did you make your intentions known to Dansco when you contacted them? If you plan to produce, say, a couple thousand of these albums in a single run, they may just agree to make them for you. But be persistent, as not everybody out there knows what the score is. James |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jewelry Manufacturer | nm0isn7e[_3_] | General | 0 | March 9th 08 06:48 AM |
Jewelry Manufacturer | [email protected] | General | 0 | December 25th 07 08:08 PM |
Jewelry Manufacturer | [email protected] | Coins | 0 | December 25th 07 08:05 PM |
Mold Manufacturer | ryv1922r | Pens & Pencils | 0 | December 4th 07 05:33 PM |
Tracking down a pen manufacturer | Matt | Pens & Pencils | 5 | July 9th 03 06:59 AM |