If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rowe CD100E Light Control Board
Have a Rowe CD100E machine and all is fine except the Light Control
Board is providing no output control at all to the lights. Reseated all connectors and also replaced bulbs to see if this helps with no luck. I do have the schematic and manual but I measure no output voltage at all. I was wondering if there is a common issue with these controllers or possibly a rebuild kit you can buy? Thanks for your help, Tony (in Canada) |
Ads |
#2
|
|||
|
|||
Quote:
If you have the full manuals for the CD-100E check out the picture on page 8-30 in manual 2 it shows the location of a Resistor Assembly part number 21955903 if this is open circuit the lamps will not light in the sound to light unit. Regards Alan Hood ami-man UK |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rowe R-92 Lamp Control Board Schematic | elkridge pinball | Juke Boxes | 31 | April 3rd 12 10:51 AM |
cd100e rowe problem not reading | michael dean | Juke Boxes | 3 | July 5th 10 12:45 AM |
help req: AMi Rowe CD100-E light control problem | Damian Parrino | Juke Boxes | 5 | November 8th 08 12:48 AM |
TECH - Rowe R-84 Jukebox CR123 diode on central control board | John | Juke Boxes | 0 | March 25th 06 04:03 AM |
AMI/ROWE r-83 mech. control board. | Dennis Lavin | Juke Boxes | 2 | November 26th 03 08:56 PM |