If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Tech Seeburg LS-2 Problem!
My Brother has a 1969 Seeburg LS2. Its stuck on the 7s. You press a1 and it
picks a7. Press c1 and it pick c7. It does this with all the selections. Sound like something easy but I live in Florida and he lives in Ohio anyone have any ideas I can pass along. Bud |
Ads |
#2
|
|||
|
|||
Tech Seeburg LS-2 Problem!
On Fri, 21 Jul 2006 23:17:44 GMT, "Bud Klass"
wrote: My Brother has a 1969 Seeburg LS2. Its stuck on the 7s. You press a1 and it picks a7. Press c1 and it pick c7. It does this with all the selections. Sound like something easy but I live in Florida and he lives in Ohio anyone have any ideas I can pass along. Bud Bud; I would check the Numbers bank of the Selector for dirty or very loose contacts. The Write-In pulse enters at the '1' side of the bank, and travels from switch to switch until it finds a depressed one, at which time it gets diverted to the Tormat through the route set up by the pushed switch. Another possibility is a bad connection where the Tormat plugs into the Selector. Cheers, Tony Miller |
#3
|
|||
|
|||
Tech Seeburg LS-2 Problem!
Tony,
thanks I will pass the info along! Bud "Tony Miller" wrote in message ... On Fri, 21 Jul 2006 23:17:44 GMT, "Bud Klass" wrote: My Brother has a 1969 Seeburg LS2. Its stuck on the 7s. You press a1 and it picks a7. Press c1 and it pick c7. It does this with all the selections. Sound like something easy but I live in Florida and he lives in Ohio anyone have any ideas I can pass along. Bud Bud; I would check the Numbers bank of the Selector for dirty or very loose contacts. The Write-In pulse enters at the '1' side of the bank, and travels from switch to switch until it finds a depressed one, at which time it gets diverted to the Tormat through the route set up by the pushed switch. Another possibility is a bad connection where the Tormat plugs into the Selector. Cheers, Tony Miller |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tech: Seeburg VL200 Selection Problem | [email protected] | Juke Boxes | 0 | February 28th 06 04:22 AM |
Tech: problem with -27VDC supply on Seeburg STD3 | Steve Vassiliadis | Juke Boxes | 7 | September 1st 04 03:45 AM |
TECH: Rock-Ola 1438 Selection Problem | Hassell Castle | Juke Boxes | 1 | March 10th 04 05:43 AM |
Star Trek Cards for auctionne! | Lynne Stewart | Cards:- non-sport | 0 | August 27th 03 02:14 PM |
TECH: Seeburg M100A Motor problem | Nick Guerra | Juke Boxes | 2 | July 5th 03 07:19 AM |