A collecting forum. CollectingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CollectingBanter forum » Collecting newsgroups » Juke Boxes
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

PLEASE HELP!! MM3 Problem



 
 
Thread Tools Display Modes
  #1  
Old May 2nd 08, 05:53 PM posted to alt.collecting.juke-boxes
sambora
external usenet poster
 
Posts: 2
Default PLEASE HELP!! MM3 Problem

Ok, I seem to have found most of the problems with this.
Here is what its doing now....
Selection chosen, Carosell turns and keeps turning. Arm comes to grab
record but carosell keeps turning.
So in other words Carosell wont ever stop turning.

Any help would be great! If I fix this then it should work fine after
I rewire the needle that the wires broke off from.

Thanks again group.
Ads
  #2  
Old May 3rd 08, 12:17 AM posted to alt.collecting.juke-boxes
kreed
external usenet poster
 
Posts: 376
Default PLEASE HELP!! MM3 Problem

On May 3, 2:53 am, sambora wrote:
Ok, I seem to have found most of the problems with this.
Here is what its doing now....
Selection chosen, Carosell turns and keeps turning. Arm comes to grab
record but carosell keeps turning.
So in other words Carosell wont ever stop turning.

Any help would be great! If I fix this then it should work fine after
I rewire the needle that the wires broke off from.

Thanks again group.



I would check the microswitch on the rotating plate behind the search
unit. One microswitch makes the mechanism start transferring, the
other only engages to determine the left/right side (cant remember
which) ie: it only activates on one row of pins

this activates the relay on the lower part of the mechanism, that does
the transfer cycle.
Cam sw 3 is also involved, and should be checked and preferably
replaced. With these machines and the age that they are, I would
routinely change all the microswitches on the cam assembly, this
eliminates potential future problems.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone else have this problem? sgt23 Coins 6 January 26th 08 10:22 PM
AMI I 200 Problem [email protected] Juke Boxes 3 June 19th 07 05:59 AM
I HAVE A PROBLEM YYYVVV Basketball 0 September 20th 06 11:57 PM
AMI R-82 problem Tom Juke Boxes 5 March 24th 05 12:58 AM
smc 1 problem Chips4sle Juke Boxes 1 January 6th 04 03:00 AM


All times are GMT +1. The time now is 09:29 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CollectingBanter.
The comments are property of their posters.