If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
TECH: seeburg 201 mech rejects immediately after tone arm sets downon record
Hi all,
as above, Thank you, Rick |
Ads |
#2
|
|||
|
|||
TECH: seeburg 201 mech rejects immediately after tone arm setsdown on record
On 2019/08/11 8:47 p.m., flashbk13 wrote:
Hi all, as above, Thank you, Rick The service manual is where you need to start as it gives you a great troubleshooting sequence. I'd suggest getting a good reprint such as the Victory Glass edition - the best reprint out there IMHO. Check for jammed cancel switch on rear, check for maladjusted Trip switch on the mechanism. Check for maladjusted switches on switch stack. All these are covered, along with the proper adjustments, in the manual. Don't leave home without it! John :-#)# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 (604)872-5757 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#3
|
|||
|
|||
TECH: seeburg 201 mech rejects immediately after tone arm setsdown on record
On Sunday, August 11, 2019 at 8:47:14 PM UTC-7, flashbk13 wrote:
Hi all, as above, Thank you, Rick Hi John, it seems to be an electrical issue as the safety plunger and clutch all seem to work ok and smoothly (cycle properly). I disconnected the back cancel button and held the tone arm from moving, still cancels (I can hear some kind of relay engaging, sounds like it is in the mech). still waiting on the manual. cant tell if the stack sws are proper or not. dont know which are the stack and trip sws. I guess the stack are the vertical sws and the horizontal at the bottom of the mech are the trip sws? Thank you, Rick |
#4
|
|||
|
|||
TECH: seeburg 201 mech rejects immediately after tone arm setsdown on record
On 2019/08/12 7:05 p.m., flashbk13 wrote:
On Sunday, August 11, 2019 at 8:47:14 PM UTC-7, flashbk13 wrote: Hi all, as above, Thank you, Rick Hi John, it seems to be an electrical issue as the safety plunger and clutch all seem to work ok and smoothly (cycle properly). I disconnected the back cancel button and held the tone arm from moving, still cancels (I can hear some kind of relay engaging, sounds like it is in the mech). still waiting on the manual. cant tell if the stack sws are proper or not. dont know which are the stack and trip sws. I guess the stack are the vertical sws and the horizontal at the bottom of the mech are the trip sws? Thank you, Rick Hi Rick, All will become clear when you have the manual. Have patience my son! John ;-#)# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 (604)872-5757 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#5
|
|||
|
|||
TECH: seeburg 201 mech rejects immediately after tone arm setsdown on record
That's a common problem usually solved by cleaning and lubricating the clutch mechanism (not an easy task). The 60+ year old grease gets gummed up and the clutch doesn't cycle properly. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TECH: seeburg ay160 mech cover removal | flashbk13 | Juke Boxes | 1 | January 15th 08 09:54 AM |
TECH: Seeburg Coin Mech Question | Homebru | Juke Boxes | 3 | August 16th 06 02:01 AM |
Tech: Seeburg 201 continuously scans for record | [email protected] | Juke Boxes | 2 | June 25th 05 04:50 AM |
L100 rejects immediately | flashbk13 | Juke Boxes | 2 | May 20th 05 02:22 AM |
Tech: Seeburg Mech: after the cleaning | Ace | Juke Boxes | 4 | December 9th 04 01:54 PM |