If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
TECH:Seeburg LPC1 Jukebox "Sits and Spins"
I have a Seeburg Model LPC1 that I have cleaned up and got running pretty
well. The only exception to this is that when it plays on the even side of the record it will sit and spin after the record rejects and is return to the mechanism. If I pull up and down on the reversing relay the machine will then continue it scan. I also notice that when the mechanism completes it scanning the reversing relay is still pulled. Help would be appreciated. Rick |
Ads |
#2
|
|||
|
|||
You must compleatly clean all the dirt & oil off of all the contacts
then polish the ones that are burned or pitted then adjust the ones that are off a bit . Then everything that moves either needs cleaning , oiling or both . Untill you do that you will have trouble with the machine at times . |
Thread Tools | |
Display Modes | |
|
|