If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Seeburg V200, stepper problems
I have been trying to figure out a problem with this thing, the letter
step will miss a step 50% of the time, the number step will miss 80-90% of the time, mostly occurs when you select the higher numbers, & letters, usually A,B,C, and 1-4 selections are 97% correct anything higher, theres problems, (the fault is consistant with the stepper, (TSR-1L6), I've had 3 different wallboxes connected to it,(they all work fine on a 201 i have) ), tubes have been tasted, moved around, the SR has been recaped, retifier. Stumped! Any ideas? Help would be great, Thanks, Mike. |
Ads |
#2
|
|||
|
|||
Seeburg V200, stepper problems
On Oct 15, 4:10�am, EmTee wrote:
I have been trying to figure out a problem with this thing, the letter step will miss a step 50% of the time, the number step will miss 80-90% of the time, mostly occurs when you select the higher numbers, & letters, usually A,B,C, and 1-4 selections are 97% correct anything higher, theres problems, (the fault is consistant with the stepper, (TSR-1L6), I've had 3 different wallboxes connected to it,(they all work fine on a 201 i have) ), tubes have been tasted, moved around, the SR has been recaped, retifier. Stumped! Any ideas? Help would be great, Thanks, Mike. When recapping the TSR, did you also replace the big oil filled capacitor? It is the one that is hodden in a metal box looking cover on the left center of the TSR looking at it from the rear with the back metal door removed. Vern Tisdale sells a motor start capacitor that works well as a replacement. This capacitor works with the pulsing of the stepper coils. the problem you describe is identical to the problem I had with both my V and VL, and replacing this capacitor has my wallboxes selecting properly 100% of the time. When this capacitor is bad, the more counts the stepper has to make, the more fouled the selection gets as it is missing stepper counts. Bill in Tacoma WA |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Needed: Seeburg V200 or VL200 drum and other V200 parts | Nimko | Juke Boxes | 0 | June 1st 08 12:11 PM |
Seeburg V200 dual price module problems | E M F | Juke Boxes | 0 | February 26th 07 02:55 AM |
V200 Stepper cover instr. labels | mrjukebox | Juke Boxes | 0 | February 6th 05 10:04 PM |
FA Seeburg RCSU3 stepper | Jim Murphy | Juke Boxes | 0 | September 29th 04 02:19 AM |
broken stepper Seeburg V200 | burning juke | Juke Boxes | 4 | November 5th 03 11:08 PM |