If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wurlitzer 1250 help please
When i first powered this on it would make propper selections the record
would lift up and in place & the needle would set down & the record would just start but not enough to play it then it would put it back and stop . this would consistantly repeat for any selection . I found a switch on the front of the meck ( one of 2 mounted together ) that was stuck on inside , i fixed that by taking the switch apart & cleaning it out . After i put it back in & aligned both so they would open & close properly on that cam . The juke made several random selections loading records but not playing them then stopped . Now all it does is load the very bottom record no matter what button i push & almost plays it . This is 100% consistant now . i can push any button but only the bottom record tray swings out . Any ideas ? |
Ads |
#2
|
|||
|
|||
Ok .. looks like there are no Wurlitzer tecks here ? I spent the
afternoon poking around watching how things work and what does what and got it working very good , just need to tear the motors down & redo them it plays one notch to slow :-) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wurlitzer wich amplifier for wich model? | LEON | Juke Boxes | 3 | July 6th 03 03:58 PM |
Where to find the manual for a Wurlitzer Carnegie CD2500 ? | John Robertson | Juke Boxes | 0 | June 30th 03 03:33 AM |