View Single Post
  #9  
Old March 12th 14, 08:38 AM posted to alt.collecting.8-track-tapes
Andy
external usenet poster
 
Posts: 117
Default Channel Master 8-track player makes a flapping noise when trying to play tapes

you attach it as a file to youre post most news readers allow you to do so

-- "detonator" wrote in message
...
On Wednesday, March 5, 2014 3:26:30 AM UTC-5, Andy wrote:
lisa can you post a picture of youre unit would love to see it.





"detonator" wrote in message

...

On Tuesday, March 4, 2014 4:18:06 AM UTC-5, Andy wrote:


It could mean but i would try a product called Zoom Spout oil its made


for




motors and the like.








--




AL'S COMPUTERS




"detonator" wrote in message




news:...




On Tuesday, February 25, 2014 2:32:04 PM UTC-5, DeserTBoB wrote:




On Fri, 21 Feb 2014 12:37:34 -0800 (PST), detonator








wrote:
















On Wednesday, February 5, 2014 11:15:36 PM UTC-5, detonator wrote:








Hi. I have a Channel Master Model 6325 8-track player. As I was


playing




a tape in it recently the player began to all of a sudden start
to


make




a flapping noise. No audio would come through but when I took a
look




inside I could see that the pulley and flywheel were indeed still




moving. If I took the belt off, and triggered the motor the
flapping




sound would go away with only the flywheel moving. If the belt is
on




the flapping sound is there. However, there is no evident problem


with




the belt itself, no tears, and not broken. It looks to be still
like




new and this belt was replaced within the past decade. It is
clean.


I




tried to check if it was a loose belt issue by using a rubber
band


that




is smaller than the belt size to run it but the same flapping
sound




occurred. I also tried using compressed air to clean the inside
and




squirted oil into any holes in the flywheel with WD-40. So
without


any




belt only the flywheel moves and there is no noise but with the


belt,




the pulley moves








too








and seems to be the cause of the flapping noise. If I tried to move


the




pulley manually I can hear the flapping noise also if I speed it
up.


I've




tried a few tapes and no audio would come through from them, just
the




flapping noise. What could be the cause? Is it something under the




pulley? Is it the bearings? Would the bearings be inside the pulley
or




underneath? I tried to remove the pulley to see if anything needs




tightening under there but I don't see how to get it off the
spindle?.




Thank you for any help or ideas.
















Hi. I want to amend some things from my previous post. I realize
now


that




the tape I was playing when the sound started to occur had a broken


post




where the roller sat. I had found the broken piece so it's not
stuck


in




the machine but the player continues to make this spinning sound
like




it's the flywheel or pulley. I do hear sound now from my tapes but
not




without this loud sound of something spinning which I guess must be




either the flywheel or pulley. Again, would the bearings still be
the




cause of this?
















First off, NEVER use WD-40 as a lubricant. It is a water displacer,








nothing more. Use light amber machine oil or turbine oil for








lubricating the capstan/flywheel bushing. You may be hearing that








"spinning" noise because of inadequate lubrication from the WD-40.








I had the noise issue before even using the WD-40. I guess I could try
to




lubricate with light amber machine oil or turbine oil but if the noise
is




still there then would that mean the bearings are gone? Any ideas are




greatly appreciated.




Lisa




Thanks. I will get some of that and try it out.


Lisa

I would post a picture of it but I don't see a way to do it in this group.
Lisa



Ads