View Single Post
  #1  
Old May 14th 17, 08:33 AM posted to alt.collecting.juke-boxes
flashbk13
external usenet poster
 
Posts: 81
Default Tech.: Another United UPC100 problem

hi all,
I have a ground fault problem. If plugged into a ground fault receptical, it will pop the fault button it I try to use any of the mechanism logic. If I run the carousel directly (engage the indexing plunger) it runs ok, but if I try the start relay, left or right transfer relays, or lift up the popularity meter window cover lever, it trips the wall outlet. The fuses in the machine or the house circuit breaker do not blow/trip. This would explain why the ground blade was cut off of the cord. I installed a new plug (wired correctly) and have this problem. I have NOT tried using a regular wall socket. I am still unfreezing motors.
Also, any thoughts on why one castor goes up into the socket higher than the rest? It looks ok from the outside. I swapped around the other castors to that location, the same problem, so at least I know all the castors are the same size. So that socket has some kind of problem. Thank you, Rick.
Ads