View Single Post
  #21  
Old December 20th 12, 04:38 AM
JeffP JeffP is offline
Member
 
First recorded activity by CollectingBanter: Nov 2012
Location: Ringwood NJ 07456
Posts: 42
Default

Quote:
Originally Posted by Terry S View Post
On Dec 11, 9:33*pm, JeffP wrote:
Here is an update,

I have finished making the 2 hardest wooden templates For the HR100R.

The White section is dead on accurate when compared with 2 of my
HF100R’s jukeboxes especially in regards to the front edge where it
meets the Brown and the Cash Box door Trim.

I think when you enlarge the photos of the cash box door trim section
you will be pleasantly surprised on how nice and small the gap actually
is between the trim and the White Laminate.

The Brown section is dead on accurate when compared to a late 1990’s
leftover kit piece that I had laying around.

I still have to make a jig for the sections that go between the fluted
glass pieces and the 2 little strips that go on the top of the Brown
hockey sticks for lack of a better word

Hope you enjoy these pictures.
Talk to you soon.
Jeff P.

+-------------------------------------------------------------------+
|Filename: IMG_1156.JPG * * * * * * * * * * * * * * * * * * * * * * |
|Download:http://www.collectingbanter.com/attachment.php?attachmentid=263|
+-------------------------------------------------------------------+

--
JeffP


Jeff, when do you anticipate kits will be available? I could start
taking apart my R, but I don't really want it spread out across the
basement for weeks :-)

Terry
Hi Terry, I built the templates and cut the formica pieces out already... I checked all the pieces against 2 of my HF100Rs' and they are a perfect fit..

I bought 20 shipping boxes from Uline http://www.uline.com/Product/Detail/...y-Fold-Mailers
and I received them today. With Shipping and Tax for these boxes my bill was $185.00 so thats $10.00 a box that will be added to the Kits shipping charges. Multiple kits can definitely fit in one box as these boxes are 200# test and are adjustable up to 6 inches in depth.

I built a jig to heat the brown pieces up so that they can be bent. Luckily I used scrap pieces of burl to test this procedure because I cracked a few pieces and melted a few others. I think I finally figured out how hot the gun needs to be and how long the heat needs to be applied.

At his point I bought one 4 x 8 sheet of White and one 4 x 8 sheet of Brown which gave me 3 sets of White materials and 4 or 5 sets of Brown materials.

So I basically have 3 complete kits at this time.

Given that, I have 2 sets sold to Jay from California which leaves me with one set left over from the first batch.

The 3rd set will go on a first come first go basis based upon who's check clears first.

At this point, all the hard work has been done and all the ducks are lined up so I can reproduce these kits with a few days turnaround. This is possible because all the materials are readily available from my local distributor and all the templates and jigs are already made and have been proven.

Oh... I still have to cut out the little pieces that go on the ends of the title strip holders as well as the pieces that go between the fluted glasses and top and front side of the Brown Hockey sticks. This process should go pretty quickly as I purchased a heavy duty Guillotine cutter specifically for these pieces.

So to answer your question, If you send me the $325.00 plus the boxing and shipping fees from 07456 to your house, even if I dont have a kit made when I receive the money, by the time the check clears I should have a kit ready for shipping.

Current "Potential Buyers/Interested Parties" information that I have:

2 kits for Jay from California, Have email, shipping address and phone number

1 kit for WildBill, Have email

1 kit for Nmacrae from Minnesota, Have email

1 kit for Terry S, Have no information

1 kit for CoinOpNY, Have email, shipping address and phone number

1 kit for Nigel from UK, Have email

1 kit (Maybe) for Dziedzk, Have email

Just as a side note.... my kits will come with a 100% Satisfaction
Guarantee.... If for any reason anyone who buys a kit from me is not 100%
satisfied for any reason, As long as they return the entire kit to me
un-used, I will gladly reimburse them the money spent for the kit.

You are always welcome to contact me over the phone with any questions that you may have or you can also email me at:

TribalRoadKing “insert at sign” OptOnline “insert dot” Net

Payments can also be made using "PayPal"
.
Thanks for your interest

Jeff Pluchino
68 Cheshire Lane
Ringwood NJ 07456
973 962-6654

Last edited by JeffP : January 26th 13 at 07:02 AM.
Ads