View Single Post
  #10  
Old July 14th 08, 06:26 AM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
 
Posts: 901
Default 222 Last Problem - Hopefully

DesotoFireflite wrote:
To: John Robertson
222 Last Problem - Hopefully
By: John Robertson to alt.collecting.juke-boxes on Sat Jul 12 2008 02:48 am

The Detent switch sets the timing for the read pulses to the Tormat
contacts. If it is off or not working well then you can not read
contacts (not trip the toroid) and/or get extra trips because of arcing.


Ok, that is now done. I now have good contact after a good cleaning and
burnishing. All adjustments have been made, but the problem still exist. When
I first did the cleaning and adjustments, and turned the unit back on, it
seemed to stop on almost every selection on the odd side, now that everything
has played through, it's back to it random play with every selection you
play. Any other ideas. As always, thanks for your help.

--- Synchronet 3.15a-Win32 NewsLink 1.85
Valhalla Home Services! - Over 100 Online Games! - telnet://valhalla.synchro.net


WHen you had the Tormat Control Center repbuilt did they check the
small pre-amp module ("L" shaped with a 12AX7)? I've found that the
resistors in that unit if erratic or off-value will produce strange
results...a voltage test should show if there is a problem, or check the
resistors against the chart.

John :-#)#

--
(Please post followups or tech inquiries to the newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
Ads