On 2006-06-08 22:13:00 -0700, John Robertson said:

On 2006-06-07 21:06:28 -0700, "Al Last" said:

I know it takes many pages to tape together but I've done that before.
I have a manual just ordered from Jeff Wager but client pressure to
repair it for the weekend if possible.

Thanks, Al Last

contact me at Remove the (dot) and replace with .

Most problems with Wurlitzers are bad or noisy microswitches. I
recommend that you test ECRY microswitch with an ohm-meter before
moving on to other potential issues. The other area to check are the
latch switches on the keyboard, clean them with a points file and
adjust to the manual.

Go to http://www.flippers.com/juke-tip.html and read that page...

John :-#)#

Typo...sigh... meant "test EVERY microswitch"

John :-#)#
--
(Please post followups or tech enquires to the newsgroup) John's
Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com "Old pinballers never die, they
just flip out."