View Single Post
  #4  
Old April 7th 17, 06:49 PM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
 
Posts: 901
Default Rockola 1454 Geneva Gripper Release and Turnover Alignment

On 2017/04/07 9:37 AM, wrote:
On Wednesday, April 5, 2017 at 4:23:49 PM UTC-5, wrote:
I'm having trouble getting these two gripper cams aligned - I cant find a good reference for these pieces. I have the service and parts manual but there isn't enough detail to put this together. If any one has a reference it would much appreciated - thanks


Thanks for the Info John! I'm in the process of taking the gripper assembly apart right now - your page you posted is very helpful!


If you want to send me some photos, in case I missed anything or the
photo isn't clear, I'd be happy to add them to the page.

Glad it is helping. I want to make more of these to help train folks in
doing the tricky bits of fixing their machines, but rarely have the time.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
Ads