CollectingBanter

CollectingBanter (http://www.collectingbanter.com/index.php)
-   Juke Boxes (http://www.collectingbanter.com/forumdisplay.php?f=21)
-   -   Rowe AMI 200 Model #R-88 Selection Problem (http://www.collectingbanter.com/showthread.php?t=321231)

RyanManess July 1st 12 03:05 PM

Rowe AMI 200 Model #R-88 Selection Problem
 
Hello all this is my first post here. I have an AMI 200 model r-88 juke box. I cannot get it to take manual selections. I can set it to play continuously random records no problem.
Any help will be greatly appreciated!
Ryan Maness

Alan Hood July 11th 12 12:09 PM

Quote:

Originally Posted by RyanManess (Post 692591)
Hello all this is my first post here. I have an AMI 200 model r-88 juke box. I cannot get it to take manual selections. I can set it to play continuously random records no problem.
Any help will be greatly appreciated!
Ryan Maness

Hello Ryan,

You need to send the following board to be checked by a Rowe Ami specialist:-

CCC (Central Control Computer)
Pricing Board (just below the CCC)
Mechanism Control Unit (on the mechanism/carousel)

It may be an idea to include the opto switch.

If you were in Europe you could send in the boards for testing/repair.
In the USA Bruce Wentworth is your man.

Regards
Alan

Alan Hood
ami-man
UK

kreed July 12th 12 12:16 PM

Rowe AMI 200 Model #R-88 Selection Problem
 
On Wednesday, July 11, 2012 9:09:44 PM UTC+10, Alan Hood wrote:
RyanManess;692591 Wrote:
> Hello all this is my first post here. I have an AMI 200 model r-88 juke
> box. I cannot get it to take manual selections. I can set it to play
> continuously random records no problem.
> Any help will be greatly appreciated!
> Ryan Maness

Hello Ryan,

You need to send the following board to be checked by a Rowe Ami
specialist:-

CCC (Central Control Computer)
Pricing Board (just below the CCC)
Mechanism Control Unit (on the mechanism/carousel)

It may be an idea to include the opto switch.

If you were in Europe you could send in the boards for testing/repair.
In the USA Bruce Wentworth is your man.

Regards
Alan

Alan Hood
ami-man
UK




--
Alan Hood



The R-88's sold by the Australian distributor had a board that looked identical to the R-89 and up, but was slightly different electrically. There was no pricing board.

It is possible that these have appeared elsewhere too, so there might possibly not be a pricing board in the OP's unit.


Thinking back about 13 years or so , I had an AMI R-91 or 2 that often used to "cut out" on the first selection of the day, but not on random play. It turned out to be the magazine motor had a shorted turn, and would heat up, and the thermal cutout would open, if it did more than about 1.5 revolutions. On the early machines, it would find the home position as soon as you turned power on, and this meant usually less than one rotation of the magazine. Any selection made after that would involve less than one rotation too, and the time the record played was sufficient for the motor to cool.

With these later machines, the magazine would find the home position AFTER the first selection was played, then go on to play it. This could result in up to 2 revolutions of the magazine and the motor did not like this and would usually cut out for some time, causing errors, and other weird stuff to happen. Later it would come good of course.

Add to this the fact that in Australia, the mains is 50HZ unlike the 60HZ in the US, the motor took significantly longer to do a complete revolution.

I doubt that there is any gearing change between the 50 and 60HZ motors, as ones that are direct US imports (not made for AUS market) rotate at the same speed as the Aus marketed ones.


The guy did not want to spend money to replace or rewind the motor, and once hearing my diagnosis, and noting the diffence in run time, simply swapped mechs to an R-84 machine where it never would run that far in one go and would likely not give any indication of trouble very soon..

They were then sold for home use, and I heard no more about it.



[email protected] July 18th 12 02:58 AM

Rowe AMI 200 Model #R-88 Selection Problem
 
On Sunday, July 1, 2012 9:05:20 AM UTC-5, RyanManess wrote:
Hello all this is my first post here. I have an AMI 200 model r-88 juke
box. I cannot get it to take manual selections. I can set it to play
continuously random records no problem.
Any help will be greatly appreciated!
Ryan Maness




--
RyanManess


Take a look here..
http://www.cdadapter.com/r84chip.htm
It fixed a box for me.You cannot get the chips anymore,so this is the next solution.

kreed July 22nd 12 12:20 AM

Rowe AMI 200 Model #R-88 Selection Problem
 
On Wednesday, July 18, 2012 11:58:42 AM UTC+10, (unknown) wrote:
On Sunday, July 1, 2012 9:05:20 AM UTC-5, RyanManess wrote:
> Hello all this is my first post here. I have an AMI 200 model r-88 juke
> box. I cannot get it to take manual selections. I can set it to play
> continuously random records no problem.
> Any help will be greatly appreciated!
> Ryan Maness
>
>
>
>
> --
> RyanManess

Take a look here..
http://www.cdadapter.com/r84chip.htm
It fixed a box for me.You cannot get the chips anymore,so this is the next solution.



What you are saying is true, but note that R-88s have been known to have 2 very different types of CCC board fitted in them. Your post applies if it has the CCC like in the R84 - R87 fitted, but many R88's have a version of the R89-94 CCC installed.


Note that this CCC while it looks the same as the R-89 type, it is electrically different, but all the IC's are readily available standard types, and the chip you link to is not used in these ones.




Alan Hood July 24th 12 01:43 PM

Quote:

Originally Posted by kreed (Post 692738)
On Wednesday, July 18, 2012 11:58:42 AM UTC+10, (unknown) wrote:
On Sunday, July 1, 2012 9:05:20 AM UTC-5, RyanManess wrote:
> Hello all this is my first post here. I have an AMI 200 model r-88 juke
> box. I cannot get it to take manual selections. I can set it to play
> continuously random records no problem.
> Any help will be greatly appreciated!
> Ryan Maness
>
>
>
>
> --
> RyanManess

Take a look here..
http://www.cdadapter.com/r84chip.htm
It fixed a box for me.You cannot get the chips anymore,so this is the next solution.



What you are saying is true, but note that R-88s have been known to have 2 very different types of CCC board fitted in them. Your post applies if it has the CCC like in the R84 - R87 fitted, but many R88's have a version of the R89-94 CCC installed.


Note that this CCC while it looks the same as the R-89 type, it is electrically different, but all the IC's are readily available standard types, and the chip you link to is not used in these ones.

Hello Ryan,

What is the CCC number on your R-88?
Is it 6-08870-04? or 4-07773-05? It should be the 608870-04 this board uses one of two custom chips -03 or -04 the alternative chip can be purchased from the USA from CD Adaptor or I still have some of the original chips in stock.

Regards
Alan

Alan Hood
ami-man
UK

[email protected] April 18th 17 01:05 AM

Rowe AMI 200 Model #R-88 Selection Problem
 
On Sunday, July 1, 2012 at 10:05:20 AM UTC-4, RyanManess wrote:
Hello all this is my first post here. I have an AMI 200 model r-88 juke
box. I cannot get it to take manual selections. I can set it to play
continuously random records no problem.
Any help will be greatly appreciated!
Ryan Maness




--
RyanManess



Alan Hood April 19th 17 04:08 PM

Quote:

Originally Posted by RyanManess (Post 692591)
Hello all this is my first post here. I have an AMI 200 model r-88 juke box. I cannot get it to take manual selections. I can set it to play continuously random records no problem.
Any help will be greatly appreciated!
Ryan Maness

Hi Ryan,

If you switch off the Playmaker Mode switch and put the Norm/Test button to test and press the popular button on the keyboard, what happens?

Have you tested the number 1 & 2 buttons?

Regards
Alan

Alan Hood
ami-man
UK


All times are GMT +1. The time now is 10:52 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CollectingBanter.com