Hf100r motor dead
 

Hi,
I had to dismantle my working 100r in order to restore the cabinet.
I have been quite careful but after puttting it togheter motor is dead.
Ok, 3A fuse blown.
Replaced, blown again...
Now I have to trace the problem. I have the service manual but before starting, any ideas of what is more probably the problem?

Thanks
Lore

Hf100r motor dead
 

Probably bent contacts on reversing switch.

Mike
On Fri, 23 Mar 2018 00:32:04 -0700 (PDT), Lore
wrote:

Hi,
I had to dismantle my working 100r in order to restore the cabinet.
I have been quite careful but after puttting it togheter motor is dead.
Ok, 3A fuse blown.
Replaced, blown again...
Now I have to trace the problem. I have the service manual but before starting, any ideas of what is more probably the problem?

Thanks
Lore

Hf100r motor dead
 

ahh, right, I finally discovered the contacts on the most left of the reversing switch seem to be shorted. From the manual I see this should be the cancel solenoid ones...
ok, found it opening the top back door, there are two of them.
Now, it seems quite difficult to access them and see what happened without taking out the Whole motor block.
Any clues to unblock the solenoids (maybe for some reason stuck) or should I start to take out the motor block?

Thanks a lot again


Il giorno venerdì 23 marzo 2018 15:44:22 UTC+1, Mike Thomas ha scritto:
Probably bent contacts on reversing switch.

Mike
On Fri, 23 Mar 2018 00:32:04 -0700 (PDT), Lore
wrote:

Hi,
I had to dismantle my working 100r in order to restore the cabinet.
I have been quite careful but after puttting it togheter motor is dead.
Ok, 3A fuse blown.
Replaced, blown again...
Now I have to trace the problem. I have the service manual but before starting, any ideas of what is more probably the problem?

Thanks
Lore