NSM CityII ESII
I have a NSM city II it will scan find the correct record and start to load it. After getting it almost all the way in to the clamp the motor stops running.
The turn table motor is running I can turn the black motor by hand and it will finish loading and the tone arm sets down on the record but there still is no sound. Can anyone help me with this Please. I have a manual that the person I got it from had but cant see what keeps the motor running till it loads. Thank You for your Time Dave |
NSM CityII ESII
On 2018/10/09 5:17 PM, Dave N. wrote:
I have a NSM city II it will scan find the correct record and start to load it. After getting it almost all the way in to the clamp the motor stops running. The turn table motor is running I can turn the black motor by hand and it will finish loading and the tone arm sets down on the record but there still is no sound. Can anyone help me with this Please. I have a manual that the person I got it from had but cant see what keeps the motor running till it loads. Thank You for your Time Dave This could be mechanical, check the condition of the plastic cam lobes - are any split or the cam plastic body? I've seen that stop the load cycle early... John :-#(# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 (604)872-5757 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
All times are GMT +1. The time now is 01:18 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CollectingBanter.com