Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC
I know it takes many pages to tape together but I've done that before. I
have a manual just ordered from Jeff Wager but client pressure to repair it for the weekend if possible. Thanks, Al Last contact me at Remove the (dot) and replace with .. |
Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC
On 2006-06-07 21:06:28 -0700, "Al Last" said:
I know it takes many pages to tape together but I've done that before. I have a manual just ordered from Jeff Wager but client pressure to repair it for the weekend if possible. Thanks, Al Last contact me at Remove the (dot) and replace with . Most problems with Wurlitzers are bad or noisy microswitches. I recommend that you test ECRY microswitch with an ohm-meter before moving on to other potential issues. The other area to check are the latch switches on the keyboard, clean them with a points file and adjust to the manual. Go to http://www.flippers.com/juke-tip.html and read that page... John :-#)# -- (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC
On 2006-06-08 22:13:00 -0700, John Robertson said:
On 2006-06-07 21:06:28 -0700, "Al Last" said: I know it takes many pages to tape together but I've done that before. I have a manual just ordered from Jeff Wager but client pressure to repair it for the weekend if possible. Thanks, Al Last contact me at Remove the (dot) and replace with . Most problems with Wurlitzers are bad or noisy microswitches. I recommend that you test ECRY microswitch with an ohm-meter before moving on to other potential issues. The other area to check are the latch switches on the keyboard, clean them with a points file and adjust to the manual. Go to http://www.flippers.com/juke-tip.html and read that page... John :-#)# Typo...sigh... meant "test EVERY microswitch" John :-#)# -- (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
Needed: Download site for Wurlitzer 3500 Zodiac SCHEMATIC
Thanks John for the advise. Yes I agree with you on the microsw problems. I
too have repaired many of the 3000 and american series. More than I really want to admit to. I promised the wife I'd NEVER bring another of that series in our garage again. Oh well, the things ya do for a buck. I have most of the 1800-3700 manuals except the diac 3500. It is slightly different credit accumulator. I already checked and replace about 4 micros last week. I've adjusted and cleaned the selection panel and relay contacts etc. I need to check the timing of the sw closures under the keyboard as I think RY2 START relay isn't getting a chance to lock in fast enough to allow the stepper to register the XY selection, rotate to it's location, and punch in the pin. I'm working on it as I write this email so probably have it repaired before manual arrives from Jeff Wager monday. Thanks again, Al Last pins4us "John Robertson" wrote in message news:2006060912252811272-spam@flipperscom... On 2006-06-08 22:13:00 -0700, John Robertson said: On 2006-06-07 21:06:28 -0700, "Al Last" said: I know it takes many pages to tape together but I've done that before. I have a manual just ordered from Jeff Wager but client pressure to repair it for the weekend if possible. Thanks, Al Last contact me at Remove the (dot) and replace with . Most problems with Wurlitzers are bad or noisy microswitches. I recommend that you test ECRY microswitch with an ohm-meter before moving on to other potential issues. The other area to check are the latch switches on the keyboard, clean them with a points file and adjust to the manual. Go to http://www.flippers.com/juke-tip.html and read that page... John :-#)# Typo...sigh... meant "test EVERY microswitch" John :-#)# -- (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
All times are GMT +1. The time now is 08:11 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CollectingBanter.com