PLEASE HELP!! MM3 Problem
 

Ok, I seem to have found most of the problems with this.
Here is what its doing now....
Selection chosen, Carosell turns and keeps turning. Arm comes to grab
record but carosell keeps turning.
So in other words Carosell wont ever stop turning.

Any help would be great! If I fix this then it should work fine after
I rewire the needle that the wires broke off from.

Thanks again group.

PLEASE HELP!! MM3 Problem
 

On May 3, 2:53 am, sambora wrote:
Ok, I seem to have found most of the problems with this.
Here is what its doing now....
Selection chosen, Carosell turns and keeps turning. Arm comes to grab
record but carosell keeps turning.
So in other words Carosell wont ever stop turning.

Any help would be great! If I fix this then it should work fine after
I rewire the needle that the wires broke off from.

Thanks again group.


I would check the microswitch on the rotating plate behind the search
unit. One microswitch makes the mechanism start transferring, the
other only engages to determine the left/right side (cant remember
which) ie: it only activates on one row of pins

this activates the relay on the lower part of the mechanism, that does
the transfer cycle.
Cam sw 3 is also involved, and should be checked and preferably
replaced. With these machines and the age that they are, I would
routinely change all the microswitches on the cam assembly, this
eliminates potential future problems.