Hey guys. I'm working on an AY160 that's got a problem I've never seen before. Whenever the box is in PLAY mode and the mech is scanning, it will trip and play random records that were not selected. There is no pattern to the random selections. The problem occurs even if the memory is cleared...

does anyone know how to repair the hammer coil that is not energising after its moved to play postion thankyou

im having a problem with my seeburg scm2 juck box the motor turns constantly and will only pick up the disk when i manually flip the switch next to the motor and when song is over disk goes back like it should the motor contiunes to run but the carriage will not move left or right. please help!

can someone tell me the difference in the 1400 and 1450 as far as the internals being the same, etc. just wanted to know if most everything was intercahangeable. looks as though maybe some of the cosmetics might not be but everything else and are good used parts hard to find. thanks in advance.

I have a 1100 that I purchased years ago. Someone else semi restored the jukebox. The amp was partially restored, sounded ok but the sound system had a loud pop when the record trips out as well as when using the encore unit. Pressing the side reject button does not cause the loud pop noise. I...

I have a very nice ROWE R93 combo that I just picked up. It has error codes 30 and 32 up power up. I cannot get anything to work. Any directions someone could offer would be very appreciated. I do not have a book for it...yet. Thanks

Hi all, I bought a Seeburg PFEA1U a few months ago and after replacing a fried transformer on the amp finally got it to the point where it would play. I was listening to it yesterday for about an hour when I noticed that it loaded a 45, and there was a loud metal/mechanical clunking noise. The...

On Nov 2, 10:43*pm, jsthomps wrote: Hi Everyone, I was wondering if there is a jukebox database similar tohttp://www.ipdb.org/ which documents most if not all pinball machines every made. Thanks, Scott pinballrebel.com

Guys, First off, I'm a pinball guy and I need some expert juke advice. I'm going to go look at this juke on Saturday. I have only seen email pics so far and the box looks nice. The seller says it works with the exception of the volume is so low it can barely be heard. Is this something serious or...

The glass or front was recently broken out of my wurlitzer 1050 does anyone know where I can get another one with the printing Wurlitzer Juke Box on it?

Hi, looking for the metal frame that the Teu-1 receiver board mounts on. Thanks!

I need the bracket that holds the dba for a ROWE 100 h cd box will buy or trade mike pacak 330 518 3141

I've got a nice, working AMI Rowe CD Bubbler. Sounds good. Needs one bubble tube replaced. Could use main speaker recone, but it sounds very good nonetheless. Nice plastics, nothing cracked or broken. $2000 FIRM, cash and carry in Phoenixville, about 30 minutes west of Phila, PA. Thanks! ...

I have a Rowe R-92 with CD player, everything works except when I enter a 5100 or any 51xx It plays the entire CD I can't play individual tracks. I have changed CD player It does the same thing. any help?

I have some jukes that need to go. will start parting them out later next week..... let me know if there's anything you need from R-84 R-81 R-74 R-89 R-91 also NSM prestige 160 and NSM satelite 200 . located in chicagoland pick up or can ship

I found it was moving and causing a loud hum for a second, or sometimes I would lose the base,then I would wiggle it and all was good again. Well it kept happening and I bent the prongs out just slightly,well I thought I had it fixed then last night when I was selecting a song I think it shook it...

Hi I have a pair of 8" satelite Speakers and I hooked them up and 1 is dead I have them set on the 16 setting I tried swaping speakers from left to right and the same one works on the other line. I read one is a -1 and one is supposed to be a -2 but it appears I have 2 -1's I think, does that make...

I have a nice original 1464 Wall Hung 120 select. Plays good, good glass , good buttons, Chrome is good, tear in grille screen. $2,000 will deliver to Chicago for $50.

i have a complete selection panel from a wurlitzer 1250. plug/wiring/ buttons all looks akay. it looks as though you can just plug it in and it may work. this is from a parts box i got so i dont know if it will work or not. metal casting looks good. just needs a good cleaning. $150 you pick up. you...

I have a Seeburg M100B that is working fine. The amp has been rebuilt but not the selection receiver unit. If it is working fine is it necessary to rebuild this unit?